Overview
The TeraFlex 1952600 is a joint rebuild kit for the lower short FlexArm, and it covers four arms. It contains the replacement components needed to rebuild a FlexArm joint.
Grit, grime, dust and fluids wear the joint’s bushings over time. A periodic rebuild restores correct joint operation. Confirm the kit matches your arm before ordering.
Key features
- Chrome-plated misalignment ball
- Two urethane bushings
- Large retainer washer and snap ring
Signs a FlexArm joint is worn
A FlexArm joint works through a ball and bushing arrangement that allows the arm to move through its range. Over time, grit and fluids can work into the bushings and the joint can develop play, which shows up as clunking or wandering on uneven ground. Catching that early helps protect the other suspension parts from extra stress.
Inspection starts with the joint at rest. Feel for movement in the ball, check the bushings for cracks or flattening, and look for dried grease or fluid around the retainer. A rebuild is easier when the joint is cleaned fully and the arm is supported, so plan the work before starting.
- Feel for play at the ball
- Look for cracked or flattened bushings
- Check for dried grease around the retainer
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER1952600 |
| Product type | FlexArm joint rebuild kit |
| Arm position | Lower short |
| Arms covered | 4 |
| Ball finish | Chrome plated |
| Bushing material | Urethane |
Vehicle fitment
Match the kit to your lower short FlexArm joint before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A rebuild replaces the joint’s wearing parts, so the joint must be removed and cleaned first. Work on the joint with the arm supported, and use the correct press or tools for the snap ring.
What’s included
The kit includes the misalignment ball, two urethane bushings, a large retainer washer and a snap ring.
