Overview
The TeraFlex 1753488 is a forged, adjustable front trackbar for right hand drive Jeep Wrangler JK models. A trackbar, also called a track bar or Panhard bar, holds the front axle centered side to side, and this version lets you set the lateral alignment of the axle after a lift. It is designed for vehicles with 0 to 6 inches of lift.
The front axle carries heavy lateral force during turning, and that load rises sharply in tight off-road situations. This trackbar is engineered to handle those side loads and is 230% stronger than the factory trackbar.
Key features
- Forged construction, rated by TeraFlex at 230% stronger than the factory trackbar
- Adjustable length for lateral alignment of the front axle
- OE style rubber bushings with an additional rate plate for handling and control
- Complete bolt-on component with no bracketry changes required
- Designed to cycle through full suspension travel without interfering with other components
- Fits right hand drive JK Wrangler models with 0 to 6 inches of lift
Side loads and steering geometry
The front axle carries lateral force whenever the vehicle turns, climbs a rut or drops off a ledge. A trackbar links the axle to the frame so that force is handled in a controlled way instead of pushing the axle sideways. Stronger components keep that link stable when the load becomes uneven.
Right hand drive owners should double-check steering direction and the position of the bar relative to the steering box or drag link before finalizing the length. The goal is a straight-ahead steering wheel with the axle centered between the frame rails.
Set the adjustment after the lift is complete and the tires are installed, because tire size can change the geometry. Work under the vehicle only when it is secured, and recheck the setting after any suspension change.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1753488 |
| UPC | 843885023272 |
| Mounting location | Front |
| Type | Adjustable, forged |
| Lift height | 0 to 6 inches |
| Bushings | OE style rubber with additional rate plate |
| Strength rating | 230% stronger than factory trackbar (per TeraFlex) |
| Drive configuration | Right hand drive models |
| Body style | 2 and 4-door models |
Vehicle fitment
It fits right hand drive Jeep Wrangler JK models with 0 to 6 inches of lift, covering 2007 to 2018 Wrangler (JK) vehicles.
Left hand drive JK Wranglers, along with LJ, TJ and JL models, are not covered by this trackbar. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a bolt-on replacement with no bracketry changes, so the factory trackbar mounting points are used. After setting the length for your lift, check that the axle is centered. Support the vehicle on stands before working under it.






