Overview
The TeraFlex 1954100 is a 1-inch rear leveling spacer for the 2007–2015 Jeep Wrangler JK. It helps level a JK that dips in the front from a winch or heavy bumper, or sits low from a loaded rear.
The spacer is 1 inch thick, works in a stock configuration or on a lifted vehicle, and is sold individually. The rear spacer includes TeraFlex’s spring retainer and guide to help the spring stay in position during extreme articulation.
The spacer adds about 1 inch at the rear, which helps level a JK that sits low in back. It is designed for leveling when a winch or heavy bumper dips the front.
The retainer and guide keep the spring in position during extreme articulation, which is the reason for the spring retainer built into the rear spacer.
Key features
- 1-inch rear spacer
- Spring retainer and guide built in
- Polyurethane coil spring spacer
- Covers 2-door and 4-door JK Wranglers and all JK Rubicon models
- Black finish
Winch and bumper leveling
A rear spacer is often chosen to offset weight at the front, such as a winch or heavy bumper, which can pull the nose down. Adding height at the rear brings the truck back toward level. The effect is simplest to judge when the vehicle is parked on flat ground with its normal load.
Because the spacer sits at the rear coil, check the rear spring seats, shock mounts and bump stops after installation. Heavier loads still shift the balance, so the spacer does not replace good load management. Recheck the hardware after the first few drives and watch for rubbing at full articulation.
- Level the truck on flat ground before measuring
- Check rear bump stop clearance after installation
- Remove heavy gear when it is not needed
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1954100 |
| UPC | 843885024903 |
| Spacer thickness | 1 inch |
| Lift location | Rear |
| Rear lift method | Coil spring spacers |
| Spacer material | Polyurethane |
| Finish color | Black |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007-2015 Jeep Wrangler JK, including the 2-door and 4-door models.
Wrangler model years 2006 and earlier and 2018 and later fall outside this fit. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The spacer is sold individually. No other hardware is listed with it.














