Overview
The Pro Comp Nitro 66150K is a 3-inch leveling lift kit for the Jeep Wrangler JK, two-door and four-door, with 3 inches of front lift and 2 inches of rear lift. The front and rear both use steel coil spacers. The kit adds front and rear shock extensions and front and rear bump stops, along with a complete hardware kit.
It adds the clearance needed for larger wheel and tire combinations without changing factory suspension or steering geometry, so the original ride characteristics stay in place. The finish is black.
Key features
- 3-inch front lift and 2-inch rear lift
- Steel coil spacers front and rear
- Front and rear shock extensions
- Front and rear bump stops
- Complete hardware kit
- Black finish
Choosing lift height and tires
A leveling kit raises only the front so it sits even with the rear, which opens room for taller tires without swapping the whole suspension. On a Wrangler JK the front axle, steering linkage and coil springs work as one system, so a spacer changes their angles a little. That is why a front lift at this height benefits from a steering and alignment check soon after installation. Plan the tire choice first, then the wheel offset, because a taller tire on the wrong offset can rub at full lock long before the lift itself becomes a problem.
Heavier tires add rotating mass, which slows steering response and puts extra load on the drivetrain. Brake performance also changes with larger, heavier wheels. Many owners revisit their bumper, tire carrier and rear load at the same time, since the rear end carries more weight when a larger spare goes on the back.
- Test steering lock and tire clearance before the first highway drive
- Recheck spacer hardware torque after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 66150K |
| UPC | 614901022568 |
| Type | Nitro leveling lift kit |
| Front lift height | 3 inches |
| Rear lift height | 2 inches |
| Front lift method | Coil spring spacers |
| Rear lift method | Coil spring spacers |
| Spacer material | Steel |
| Finish | Black |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2007 to 2018 Jeep Wrangler JK two-door and four-door models in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, including the Unlimited trims. The JL and Gladiator are outside its fit.
The JL and the Gladiator are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock extensions and bump stops are part of the front and rear installation. Have the alignment checked after installation, because the lift changes the steering and suspension angles.
What’s included
Front and rear steel coil spacers, front and rear shock extensions, front and rear bump stops and a complete hardware kit.









