Overview
The Pro Comp PLJ09137 is a 1.75 inch leveling lift kit from Pro Comp Suspension for the 2007-2018 Jeep Wrangler (JK), in 2-door and 4-door models. It raises the front and rear of the Wrangler with polyurethane coil spring spacers, so the front and rear can be leveled with each other and the kit is made to clear larger tires.
The company has built Jeep suspension systems since 1992 and designs and builds its components in the USA. The kit is made for use with stock control arms and includes extended front bumpstops and all of its mounting hardware.
Key features
- 1.75 inch lift from coil spring spacers at the front and rear
- Polyurethane spacer material
- Extended front bumpstops
- Mounting hardware included
- Built for 2-door and 4-door JK models
- Black finish
Alignment and tire clearance after lifting
Adding height at both ends of a Wrangler shifts the suspension geometry, so caster, camber and toe can move away from their factory settings. An alignment soon after installation helps prevent uneven tire wear and keeps steering predictable on the highway. Driveline angles also change when the axles sit at a new height, which is why a driveline check is worth doing on a lifted JK, especially on vehicles that spend time off road.
Tire clearance depends on wheel offset, tire width and how the front and rear are leveled. Turn the wheels to full lock and check for rubbing on the fender liners, sway bar links and brake hoses. Extended front bumpstops limit travel and reduce the chance of contact with the axle, but they do not replace a proper clearance check.
- Check steering at full lock after the first drive
- Re-torque lug nuts after the first few trips
- Look for rubbing on the fender liners at full travel
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PLJ09137 |
| UPC | 614901127508 |
| Lift height | 1.75 inch |
| Lift method | Coil spring spacers, front and rear |
| Spacer material | Polyurethane |
| Finish | Black |
| Bumpstops | Extended front bumpstops |
Vehicle fitment
It fits 2007-2018 Jeep Wrangler (JK) models in both 2-door and 4-door body styles, and no other Wrangler generation.
It is built for the JK generation, which ended in 2018 when the JL Wrangler arrived. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Raising the JK changes its alignment and driveline angles, so have the front and rear alignment checked after the spacers are installed. Pro Comp specifies stock control arms, so a JK with altered control arms may not match the kit’s design.
What’s included
Extended front bumpstops and all mounting hardware for a front and rear coil spring spacer lift.












