Overview
The Daystar PAJL175PA is a front coil spring leveling kit that raises the front 1.75 inches. It allows the use of tires up to 33-inch diameter and lets you keep your factory wheels after installation. The leveling system leaves the OEM suspension geometry and stability parameters unchanged, and the ride stays close to factory.
It fits the 2007–2016 Jeep Wrangler JK, including Rubicon, Sahara, Sport and Unlimited trims.
Key features
- 1.75-inch front lift without modifying the existing suspension
- Supports tires up to 33-inch diameter
- Keeps factory wheels usable after installation
- Keeps the factory geometry and smooth ride
- Complete installation kit included
Tire choice and leveling
A front leveling kit raises only the front of the vehicle to match the stock rear height, which is why it is often chosen for a level stance. The added height gives room for larger tires, but the wheels and tires should still be checked for rub at full steering lock and on suspension compression. Tire diameter also affects speedometer readings and gearing, so plan for those changes.
Front-only leveling changes the position of the front suspension, so have the front alignment checked after installation. Inspect the brake lines and the front driveshaft or CV angles for stretch and wear, since these were set for stock height. Rebalance the wheels after the tire change and recheck clearances once the vehicle has been driven for a short distance.
- Check wheel clearance at full lock
- Confirm steering and brake hose slack
- Plan an alignment after installation
Specifications
| Brand | Daystar |
|---|---|
| Part number | PAJL175PA |
| UPC | 618089008550 |
| Lift height | 1.75 inches |
| Position | Front |
| Maximum tire diameter | 33 inches |
| Installation time | About 2 hours |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2016 Jeep Wrangler (JK), including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, plus the Unlimited versions of those trims.
Later Wrangler JK years and the JL generation are not part of the listed fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit installs in about 2 hours with everything needed included. It works with the stock coil springs, so have the front alignment checked after installation.
What’s included
- Front coil spring leveling kit with urethane spacers
- Hardware for installation









