Overview
The SPOD Self Contained System, part number SCS, is a compact switch panel that comes fully wired and integrated. It holds six single incandescent lighted switches and a 12 position terminal block, so accessories can be added without separate switch wiring.
It has universal application and is not built around a single make, model or year. It measures 8 inch wide, 8 inch long and 3 inch high.
Key features
- Comes fully wired and integrated
- No wiring required for the switches
- Compact, 8 inch wide, 8 inch long and 3 inch high
- Six single incandescent lighted switches
- 12 position terminal block for accessory attachment
- Easy access for adding accessories
Choosing a mounting location
A compact self contained panel suits a spot where the driver can reach the switches without leaning or looking down for long periods. Consider the dash, overhead console or pillar area, and check that the panel will not block airbags, the shifter, the parking brake or a passenger’s knee. Measure the space with the seat in several positions before drilling anything.
Accessories wired to the terminal block need their own fuses and routing. Group switches by use, such as lights on one side and winch or compressor controls on the other, and keep higher-draw circuits short. Re-check the mounting screws and bracket after rough trail use, since the panel is only as steady as its fasteners.
- Measure the mount space with the seat in use
- Keep airbag and shifter areas clear
- Use a fuse for each accessory circuit
Specifications
| Brand | SPOD |
|---|---|
| Part number | SCS |
| UPC | 700007270281 |
| Dimensions | 8 inch wide, 8 inch long, 3 inch high |
| Switches | Six single incandescent lighted |
| Terminal block | 12 position |
| Wiring | Fully wired and integrated |
| Mounting | Brackets and hardware included |
| Fitment | Universal application |
Vehicle fitment
It has universal application, so it is not tied to specific vehicles. Fit depends on the mounting space in your vehicle.
Because no vehicle is named, check the mounting space in your vehicle yourself. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting brackets and hardware are included, and the switches need no wiring of their own. Confirm the mounting location and any clearance before installing the panel, and disconnect the battery before making any power connections to accessories.
What’s included
The self contained switch system with six single incandescent lighted switches, fully wired, a 12 position terminal block, and mounting brackets and hardware.
Not included: the accessories you wire into the terminal block.


















