Overview
The Spidertrax Offroad WHS011 is a 1.375 inch thick aluminum conversion wheel adapter that changes a wheel’s bolt pattern from 5 on 5 to 5 on 4.5. It converts to the bolt circle used by the 1986-2006 Jeep Wrangler YJ and TJ.
It installs on the 2007-Present Jeep Wrangler JK, 2006-Present Commander, 2005-Present Jeep Grand Cherokee WK, or 1999-2004 Grand Cherokee axle. Each adapter is wheel and hub centric and double anodized in dark blue.
Key features
- Conversion adapter, not a plain spacer
- 1.375 inch (1-3/8 inch) thick
- Bolt pattern change from 5 on 5 to 5 on 4.5
- Wheel and hub centric design
- Double anodized dark blue finish
- Kit includes 10 pre-installed wheel studs, 10 lug nuts and Loctite
Before you mount conversion adapters
Conversion adapters change the bolt pattern of a wheel, so the wheel itself has to be checked before mounting. A wheel that clears a spacer may not seat correctly on a converted pattern. Test-fit the wheel on the adapter and confirm the lug seat type matches the studs before the vehicle is driven.
Because the adapter adds thickness to the hub face, it also changes wheel offset and can affect clearance at the fender, brake caliper and steering components. Check for tire rub at full lock and after a few trail runs. Inspect the wheel bearings and hub seals while the wheel is off.
- Check lug seat type against the studs
- Torque the lug nuts after the first short drive
- Recheck tightness after the first few trail runs
- Inspect studs for thread damage at each tire rotation
Specifications
| Brand | Spidertrax Offroad |
|---|---|
| Part number | WHS011 |
| UPC | 9999279560 |
| Type | Adapter |
| Thickness | 1.375 inch (1-3/8 inch) |
| Bolt pattern | 5 on 5 to 5 on 4.5 |
| Material | 6061T6 aluminum |
| Finish | Anodized blue, double anodized |
| Quantity | 2 adapters per kit |
Vehicle fitment
It fits the 2007-Present Jeep Wrangler JK axle, covering the JK generation from 2007 onward. It also fits the 2006-Present Commander, the 2005-Present Jeep Grand Cherokee WK and the 1999-2004 Grand Cherokee axles.
The Wrangler YJ and TJ are named only as the bolt circle the adapter converts to, not as fitment for this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The adapter changes the bolt pattern, so the wheel must be checked against the converted 5 on 4.5 pattern before it is mounted. The studs are pre-installed and Loctite is included.
What’s included
Two wheel adapters, 10 standard wheel studs (pre-installed), 10 lug nuts and Loctite.









