Overview
The Spidertrax Offroad WHS025 is a pair of blue anodized wheel spacers made from 6061T6 aluminum, 1.5 in thick, with a 6 on 4.5 bolt pattern. They space out the front and rear axles of 2005-Up Xterra, 2005-Up Frontier and 2005-2012 Pathfinder vehicles that run OE wheels.
Each kit comes with 2 wheel spacers, 12 metric M12x1.25 wheel studs pre-installed, 12 M12x1.25 lug nuts and thread locker. The spacers are both wheel and hub centric, and the anodizing is a double process meant to give twice the corrosion resistance.
Key features
- 6061T6 aluminum construction
- Blue double anodized finish
- 1.5 in thickness
- 6 on 4.5 bolt pattern
- Wheel and hub centric design
- Pre-installed studs with lug nuts and thread locker
Checking stud length
Longer studs are often needed once a spacer is added, because the wheel now sits farther out on the hub. A stud that reaches the nut with only a sliver of thread can strip under load, while one that runs too long can bottom out before the nut seats. Count the threads that engage the nut before driving, and make sure each nut reaches full seat.
Start by fitting the wheel with nuts snug and checking clearance at the caliper, brake hose and fender. Tighten the nuts in a star pattern in several passes. Thread locker helps hold the nuts, but it does not replace proper seating or periodic checks.
- Count thread engagement on each stud
- Fit the wheel with nuts snug before final tightening
- Check caliper and brake hose clearance
- Inspect the nuts again after the first drives
Specifications
| Brand | Spidertrax Offroad |
|---|---|
| Model code | WHS025 |
| UPC | 799543561507 |
| Material | 6061T6 aluminum |
| Finish | Anodized blue |
| Thickness | 1.5 in |
| Bolt pattern | 6 on 4.5 |
| Quantity | Sold as a pair |
| Wheel studs | 12 metric M12x1.25, pre-installed |
| Lug nuts | 12 M12x1.25 |
Vehicle fitment
They fit front and rear 2005-Up Xterra, 2005-Up Frontier and 2005-2012 Pathfinder axles that run OE wheels. Measure the 6 on 4.5 pattern and 1.5 in thickness against your hubs first, then confirm your model year and trim.
Installation notes
The studs come pre-installed and thread locker is included. Set the torque for the M12x1.25 studs carefully before driving.
What’s included
Two wheel spacers, 12 pre-installed M12x1.25 studs, 12 M12x1.25 lug nuts, and thread locker.














