Overview
The Poison Spyder BFH front bumper package, part number JKSPECIAL09, is a Genuine Packages set of bare steel Poison Spyder parts for the 2007-2016 two-door Jeep Wrangler JK. Poison Spyder’s description covers the BFH bumper, Brawler Bar, shackle tabs, a body-mounted tire carrier and Rocker Knockers.
Poison Spyder Customs designed the BFH bumper for four-wheelers who want strength and simplicity. It is cut from one piece of 3/16-inch plate steel and brake-formed for an exact fit, and the angled facets help it slide over the rocks. The integrated winch mount is part of the one-piece design, and the Brawler Bar is a lower-profile stinger that is 7.4 inches long and 9.8 inches high.
The tire carrier is made of 1-1/2-inch DOM tubing and carries a spare up to 40 inches. The Rocker Knocker slider rail is 1.5-inch by .120 wall DOM tubing and a slider skid fills the space between the slider and the main tube.
Key features
- BFH bumper with angled facets and integrated winch mount
- Brawler Bar stinger lower profile for easier engine access
- Shackle tabs machined from 1-inch plate for 3/4-inch recovery shackles
- Tire carrier from 1-1/2-inch DOM tubing for a spare up to 40 inches
- Mounting points for Rot-Pax fluid packs and a Hi-Lift jack
- Rocker Knockers with 1.75-inch rocker rail and 1.5-inch slider rail
- Rocker Knocker mounting plate has drain reliefs
- Bare steel
Slider skid care
A slider skid takes the first hit from rocks and ledges, so it is designed to be replaceable. Check the skid for dents, gouges and loose fasteners after each trip. A damaged skid is easier to address before the damage reaches the rocker or the body.
Angled facets help a bumper deflect rocks and roots, but the surface still wears over time. Repaint or powder coat any bare spots to prevent rust. Bare steel left wet or salted will start to pit, so dry parts after washing.
A winch and a tire carrier add weight at the front and rear. Keep the winch mounted securely and check bolts after the first trips. If fluid packs or a jack are mounted on the carrier, keep them strapped so they do not rattle or shift during trail use.
- Check the slider skid for gouges
- Touch up bare spots promptly
- Dry steel parts after washing
- Secure fluid packs and jacks on the carrier
Specifications
| Brand | Genuine Packages |
|---|---|
| Part number | JKSPECIAL09 |
| UPC | 700007616821 |
| Product | BFH front bumper package with tire carrier and Rocker Knockers |
| Material | Steel plate, 3/16 in |
| Finish | Bare |
| Width | Stubby |
| Body styles | 2-door models |
| Brawler Bar | 7.4 in forward, 9.8 in high |
| Tire carrier capacity | Spare up to 40 in |
| Rocker rail tubing | 1.75 in by .120 wall DOM |
| Slider rail tubing | 1.5 in by .120 wall DOM |
| Outer skid | 1/8 in steel on a 3/16 in base plate |
| Winch mount | Included |
| Light mounts | Included |
| D-ring mount | Included |
Vehicle fitment
It is made for 2007-2016 Wrangler JK 2-door models. Match the year, model and trim to your vehicle before ordering.
The JK 2017-2018 model years and the TJ, LJ and JL generations are not in the list. The 4-door counterpart is JKSPECIAL08. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Rocker Knockers can be used on their own or with Poison Spyder’s JK Body Armor, which reaches from the slider up to the door line. The bare steel parts should be finished before use.
What’s included
- BFH front bumper
- Brawler Bar and recovery shackle tabs
- Body-mounted tire carrier
- Rocker Knockers
Not included: a winch, finishing coats and the spare tire.
























