Overview
The Poison Spyder Brawler front bumper and body mounted tire carrier, part number JKSPECIAL13, is a Genuine Packages set in bare steel for the 2007-2016 Jeep Wrangler JK in 2 and 4-door models. The front bumper is a mid-width, high clearance design in 3/16-inch plate steel with an integrated winch mount.
The body-mounted tire carrier works with the stock rear bumper or just about any aftermarket rear bumper and holds a spare up to 40 inches. It is built from 1-1/2-inch DOM tubing, with plate steel parts cut from 1/8-inch or 3/16-inch steel plate and hinge and latch assemblies designed to avoid problems common in similar carriers.
Mounting points are provided for several Rot-Pax fluid packs and a Hi-Lift jack. A Brawler Bar sits 9.8 inches above the bumper, and the shackle tabs are 1 inch plate steel.
Key features
- Mid-width high clearance front bumper, 3/16-inch plate steel
- Integrated winch mount
- Mount for a Hi-Lift jack
- Tire carrier for a spare up to 40 inches
- 1-1/2-inch DOM tire carrier tubing
- Hinge and latch assemblies designed for problems common to other carriers
- Rot-Pax fluid pack mounting points
- Bare steel
Carrier and bumper upkeep
A body-mounted tire carrier carries its load through the body, so the mounting bolts and the body structure they fasten to need regular attention. Check the bolts after the first trail trips and again after any rough stretch, and look for cracked welds or bent tubing at the hinge. The latch should close fully and hold the carrier without play. Heavier wheels and tires add load to the hinge, so inspect those points more often when running a larger spare.
The bare steel bumper needs a protective finish before it is used in wet or muddy conditions. Painting or powder coating the bumper, the carrier and the brackets helps slow rust, especially on the cut edges of the plate. Keep the winch mount and light tabs free of mud so the hardware can be removed and tightened without trouble. A Hi-Lift jack should be stored where it cannot shift against the carrier tubing.
- Check carrier bolts after rough trail sections
- Inspect hinge and latch for cracks or play
- Finish bare steel before wet or muddy use
Specifications
| Brand | Genuine Packages |
|---|---|
| Part number | JKSPECIAL13 |
| UPC | 700007616851 |
| Product | Front bumper and body-mounted tire carrier |
| Material | Steel plate, 3/16 in |
| Finish | Bare |
| Width | Stubby (mid-width) |
| Body styles | 2 and 4-door models |
| Tire carrier capacity | Spare up to 40 in |
| Tire carrier tubing | 1-1/2 in DOM |
| Plate steel parts | 1/8 in or 3/16 in |
| Brawler Bar height | 9.8 in above the bumper surface |
| Shackle tab thickness | 1 in plate steel |
| Winch mount | Included |
| Light mounts | Included |
| D-ring mount | Included |
Vehicle fitment
It fits 2007-2016 Jeep Wrangler JK models in 2-door and 4-door versions, covering both the standard and Unlimited body styles.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for 2017-2018 or other Wrangler generations.
Installation notes
The tire carrier mounts to the body and can be paired with the stock rear bumper or an aftermarket one. Its hinge and latch assemblies and the mounting points for fluid packs and a jack make it a working carrier rather than a display piece. The bare steel needs a protective finish before it sees weather.
What’s included
- Brawler front bumper
- Body-mounted tire carrier
Not included: a winch, the spare tire and finishing coats.
























