Overview
The Skyjacker 916X358X1212 U-Bolt is a set of axle clamps for mounting an axle to leaf springs, supplied as one kit of four U-bolts.
Eight Nylock tall nuts and eight thick flat washers come with it. It is not fitted to a specific year, model or axle setup.
Key features
- Four U-bolts per kit
- Eight Nylock tall nuts
- Eight thick flat washers
- Packed as a single kit
Choosing U-bolts for your axle
A U-bolt clamp holds an axle housing against the leaf springs. It carries the axle’s movement under load while keeping the spring pack seated in its perch. When the clamp is loose or undersized, the axle can rotate or shift, which shows up as wandering on the highway and uneven tire wear. Because the bolts take the full load, they are worth inspecting before a trail trip.
Choosing the right set starts with measurement. Check the bolt diameter, thread length and width against your axle tube and the spring pack it will clamp. If you are adding a lift or new springs, older U-bolts may no longer reach, so measure again. Replacing the nuts and washers at the same time is common practice, since reused nuts can lose their grip after they have been tightened once.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 916X358X1212 |
| UPC | 803696175720 |
| Hardware | Four U-bolts, eight Nylock tall nuts, eight thick flat washers |
| Packaging | Single kit |
Vehicle fitment
U-bolt dimensions depend on the axle and spring setup, so measure your axle tube and spring pack before ordering. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Four U-bolts, eight Nylock tall nuts and eight thick flat washers.





