Overview
The Skyjacker SKY916X214X812 is a single U-bolt with an E-coated finish. The coating is intended to resist corrosion, and the bolt comes with two nylon insert lock nuts for a secure clamp.
Skyjacker U-bolts come in square, round and semi-round end shapes, with lengths from 1.75 to 19 inches. For SKY916X214X812, measure the existing bolt’s diameter, thread and bend, since those decide whether this size will fit.
Key features
- E-coat finish resists corrosion
- Sold as a single U-bolt
- Nylon insert lock nuts supplied
- Clamps a spring or axle for replacement
Care and inspection
Caring for a U-bolt is mostly about keeping the finish intact and the clamp tight. Rinse road salt and mud off during regular washing, and look for bright scratches or flaking coating where the bolt rubs the spring or axle. Small coating damage is easy to touch up before rust starts under it.
Nylon insert lock nuts hold their grip best when they are not reused many times. Check the torque after the first drives on a new install and at each service interval. A loose nut usually shows as a rattle or a shiny mark on the clamp, which means the setup needs attention before more miles.
- Wash off road salt and mud
- Touch up scratches before rust spreads
- Check nut torque at each service
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKY916X214X812 |
| Product type | U-bolt |
| Finish | E-coated |
| Included hardware | 2 nylon insert lock nuts |
| Sold as | Single |
Vehicle fitment
Its universal fit label does not show the spring or axle it suits, so the size must be checked by hand. Compare it with your current bolt before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the U-bolt over the spring and axle, start the nylon insert lock nuts, and tighten them in small, even steps to the torque value for your vehicle. Check that the bolt ends line up before the final turn.
What’s included
One SKY916X214X812 U-bolt and two nylon insert lock nuts.








