Overview
The Skyjacker 516X112X2 is a U-bolt kit that clamps an axle to its suspension. Each box holds four U-bolts, eight Nylock tall nuts and eight thick flat washers, so a complete clamp set is ready to assemble.
Before you install
U-bolts carry the load where the axle meets the leaf springs or mounting plates, so the clamp set must be sized to the axle tube and to the thickness of the plate it passes through. Measure the axle tube and confirm that the thread and nut size match the rest of your hardware before tightening anything. Keep the plate square to the axle so the clamping force spreads evenly across the tube. Good fit at this stage prevents the slipping and shifting that wear out bolt threads over time.
Nylock nuts hold their position under vibration, but they still need to be tightened in an even pattern across each U-bolt. After the first few trail runs, check every nut for torque and look for flat spots, cracked threads or a bent U-bolt leg. Use lubricant only when your build calls for it, since lubricant changes the torque reading. Replace any bolt that shows stretching or rust pitting.
- Check axle tube diameter against the U-bolt size
- Inspect plates for wear before reuse
- Re-torque nuts after the first few trail runs
- Replace stretched or corroded bolts
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 516X112X2 |
| UPC | 803696213774 |
| Kit contents | Four U-bolts, eight Nylock tall nuts, eight thick flat washers |
| Sold as | Single |
Vehicle fitment
Universal fit is the only fitment statement given for this kit. No vehicle, axle or spring list is published, so compare the U-bolt sizing with your axle before use.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Four U-bolts, eight Nylock tall nuts, eight thick flat washers.
Not included: axles, springs and mounting plates are not part of the kit.







