Overview
The Skyjacker SKY58X318X1612 is a single replacement U-bolt with an E-coated finish. Each bolt comes with two nylon insert lock nuts, and it is sold as one piece.
U-bolts come in square, round and semi-round end shapes and many sizes. Compare the new U-bolt’s thread, bend and length with the old one before fitting it.
Key features
- E-coated finish
- Sold as a single U-bolt
- Nylon insert lock nuts supplied
- Used to clamp a spring to an axle
Clamping and retightening
A U-bolt sits around the spring and through the axle seat, so its clamp load must be even on both sides. Uneven tightening can pull the axle out of square and affect the way the wheels track. Snug the nuts evenly in a cross pattern before final tightening. Clean the threads before fitting so the torque reading is accurate.
Check the bolts again after the first short drive, because the spring can settle and the nuts can relax. Look for rust at the threads, cracks around the bend and any clicking when the axle moves. Replace worn nuts when they lose grip on the thread.
- Tighten in a cross pattern
- Recheck nuts after the first short drive
- Replace nuts that lose grip
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKY58X318X1612 |
| Product type | U-bolt |
| Finish | E-coated |
| Included hardware | 2 nylon insert lock nuts |
| Sold as | Single |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before buying. A U-bolt is sized for a particular spring and axle, so check its fit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the U-bolt matches the spring and axle before tightening, and use the two nylon insert lock nuts that come with it. Tighten the nuts to the specification for your vehicle once the U-bolt sits square.
What’s included
One U-bolt and two nylon insert lock nuts.







