Overview
The Skyjacker SKY58X318X712 is a replacement U-bolt sold as a single. It has an E-coated finish for corrosion resistance, and two nylon insert lock nuts come with each bolt.
Square, round and semi-round ends are offered across Skyjacker’s U-bolts, with lengths from 1.75 to 19 inches. Measure the diameter, thread and bend length of the bolt you are replacing so you can match it to this part before fitting.
Key features
- E-coated finish for corrosion resistance
- Sold as a single U-bolt
- Two nylon insert lock nuts supplied with SKY58X318X712
- Designed to clamp a spring to an axle
Choosing the right size
Size matters more than brand when replacing a U-bolt. The diameter sets the strength of the clamp, while the thread pitch decides whether the nuts seat properly. Bend length and end shape must line up with the axle tube or spring pack, or the clamp will pull unevenly.
Some drivers replace U-bolts together with the spring pad or axle seat when the old set shows worn grooves. Fresh nuts are worth fitting every time, because a reused nut can lose its locking grip and let the clamp work loose on rough ground.
After the first drives on rough ground, re-check the nut torque and look for gaps between the bolt and the axle. Small shiny marks or fresh rust trails are early warning signs that the clamp is moving.
- Diameter and thread pitch must match
- Bend length should suit the axle tube or pack
- Use new nylon insert lock nuts when refitting
- Replace the set if grooves are visible
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKY58X318X712 |
| Product type | U-bolt |
| Finish | E-coated |
| Included hardware | 2 nylon insert lock nuts |
| Sold as | Single |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, since a U-bolt must suit the spring or axle it clamps.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the two nylon insert lock nuts supplied, and make sure the U-bolt sits square on the spring or axle before tightening. Tighten to the torque value for your vehicle.
What’s included
One SKY58X318X712 U-bolt and two nylon insert lock nuts.






