Overview
Part 58X258X1412 from Skyjacker is an axle U-bolt set that groups four U-bolts with nuts and washers. Skyjacker marks it universal fit, so measure the axle and spring pack to confirm the bolts suit your setup.
Before you install
Axle U-bolts hold the axle housing tight against the leaf springs, so the clamping force depends on how well the bolt legs and threads match the housing and spring pack. Before fitting a set, check the bolt diameter, the leg length and the spacing between the two ends of each bolt. Leaf packs often differ from one spring to the next, and a lift or a change in spring thickness can shift the axle enough to make a standard set sit wrong. Measure rather than guess.
Once the bolts are in, tighten the nuts evenly across the set and recheck them after the first short drives. Nylock nuts resist loosening, but they still settle under load on rough ground, so a quick check of torque and bolt ends after the first trail runs is a sensible habit. Inspect the bolts for bends, thread damage or rust at the leg ends, because a bent leg can pull the clamp out of square and load the spring unevenly. Replace worn hardware rather than reusing it on a new install.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 58X258X1412 |
| UPC | 803696108605 |
| Sold as | Single |
Vehicle fitment
Nothing ties this kit to one named vehicle. Universal labeling means the axle diameter and spring thickness are the checks to make first.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Nylock tall nuts number eight, flat washers number eight, and U-bolts number four.



