Overview
The Skyjacker 916X314X912 is an axle U-bolt kit from Skyjacker’s suspension accessories range. Each kit supplies four U-bolts with the Nylock nuts and flat washers used to clamp an axle to its mounting hardware. Skyjacker gives this kit as universal fit, but U-bolts must match the axle tube and mounting plates, so confirm the fit against your own axle before installing.
Key features
- Four U-bolts per kit
- Eight Nylock tall nuts for locking the clamp
- Eight thick flat washers
Why check U-bolt fit
This U-bolt kit clamps the axle to its mounting hardware, so the clamp takes load every time the vehicle moves. The fit depends on the axle tube diameter and the plate holes, which is why the clamp should be checked against the axle before any tightening begins. A correct fit keeps the axle centered and reduces the chance of slipping.
Work on a level surface with the vehicle supported, and loosen the old set in an even pattern. Clean the threads, fit the washers, and snug the nuts before the final torque. After the first drive, recheck the nuts because clamps can settle under load. Replace any damaged threads rather than forcing them.
- Confirm the axle tube diameter first
- Clean threads before fitting
- Recheck nut torque after settling
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 916X314X912 |
| UPC | 803696115085 |
| Contents | Four U-bolts, eight Nylock tall nuts, eight thick flat washers |
| Sold as | Single kit |
Vehicle fitment
Skyjacker gives this kit as universal fit, and no specific vehicle is named for it. Because the clamp must suit the axle tube size and spring mounting, treat it as a hardware match to your axle rather than a vehicle match.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the U-bolt diameter and thread length against your axle and mounting plates before installing. Work on a secure, level vehicle and support it properly.
What’s included
Four U-bolts, eight Nylock tall nuts and eight thick flat washers.






