Overview
The Skyjacker SKY58X358X914 is a single U-bolt for replacing a spring or axle clamp. Skyjacker E-coats these U-bolts for corrosion resistance and durability, and two nylon insert lock nuts are supplied with each bolt.
Among Skyjacker U-bolts, the end shapes are square, round and semi-round, and lengths run from 1.75 to 19 inches. Use the old U-bolt’s thread, diameter and bend length as the reference when confirming a match.
Key features
- E-coat for corrosion resistance and durability
- Two nylon insert lock nuts with SKY58X358X914
- Sold as a single
- Replacement U-bolt for spring or axle clamping
Things to check
E-coating helps a U-bolt survive road grime, but it does not make the threads immune to damage. Check the coating for chips where the legs bend, since bare steel in those spots starts to rust first, and touch up the finish where practical.
Thread condition matters as much as the bolt itself. Clean the threads with a wire brush before fitting nuts, and replace any nut that feels rough or no longer grips the bolt. A worn nut can allow the clamp to slide on the spring pack over time.
After the first trips on uneven ground, check the nuts for torque and look for shiny marks where the U-bolt contacts the axle. These are early signs the clamp is shifting and should be retightened, or the set replaced.
- Check coating for chips at the bends
- Wire-brush threads before fitting
- Replace nuts that no longer grip
- Look for shiny wear marks at contact points
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKY58X358X914 |
| Product type | U-bolt |
| Finish | E-coated |
| Included hardware | 2 nylon insert lock nuts |
| Sold as | Single |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. A U-bolt has to suit the spring or axle it clamps, so compare its size with the old one.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the old U-bolt’s diameter, length and end shape before installation, and compare them with this bolt. Use the lock nuts supplied and tighten to the torque figure for your vehicle.
What’s included
One SKY58X358X914 U-bolt and two nylon insert lock nuts.







