Overview
The Skyjacker U-Bolt Kit 916X212X734 is a U-bolt set for mounting an axle to its springs. It contains four U-bolts, eight Nylock tall nuts and eight thick flat washers, sold as a single kit.
The kit is sold with no vehicle or year range tied to it, so match the U-bolt size to your axle and springs before selecting it.
Key features
- Four U-bolts
- Eight Nylock tall nuts
- Eight thick flat washers
- Sold as a single kit
Axle clamp basics
An axle clamp holds the housing against the leaf springs with bolts that pass around the tube and through a plate. The bolts carry the load at the clamp points, so the spacing and the bolt length matter as much as the diameter. Compare the bolt reach with the spring pack and the axle position before deciding that a set will suit.
Several other parts sit in the same clamp area. Spring pads, the axle seat and the plate all share the load, and worn ones let the set loosen. Inspect those surfaces while the axle is out of place, and clean any rust from the bolt threads. Tighten the nuts in a cross pattern and recheck them after the first drives on rough ground.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 916X212X734 |
| UPC | 803696214412 |
| Kit contents | Four U-Bolts, Eight Nylock Tall Nuts, Eight Thick Flat Washers |
| Sold as | Single |
Vehicle fitment
Fit depends on the U-bolt size matching your axle and springs, and the universal fit label does not confirm that match. Measure before buying.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Four U-bolts, eight Nylock tall nuts and eight thick flat washers, nothing else described.






