Overview
The SKY38X312X412 is a single replacement U-bolt with an E-coated finish. Two nylon insert lock nuts come with it, and it is sold as one piece.
U-bolts come in many sizes and end shapes, including square, round and semi-round ends, with lengths up to 19 inches. Measure the existing U-bolt’s diameter, thread pitch and bend before choosing this one.
Key features
- E-coated for corrosion resistance
- Sold as a single U-bolt
- Nylon insert lock nuts included
- Replacement for spring and axle clamping
Spring and axle clamping basics
U-bolts hold the leaf spring to the axle, so the clamping load they apply controls how the spring sits. Uneven clamp load can shift the axle and change the driveline angles. Keep the spring seat and the axle surface clean and free of rust before fitting new bolts. Thread lubricant is only used if the part calls for it.
Because these bolts carry heavy load, check them after the first few drives and again after any off-road outing. Look for loose nuts, shiny spots on the bend and rust streaks at the clamp. A bolt that has stretched should be replaced rather than retightened.
- Clean the spring seat before fitting
- Check nut tightness after the first drives
- Replace any bolt that shows stretch
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKY38X312X412 |
| Product type | U-bolt |
| Finish | E-coated |
| Included hardware | 2 nylon insert lock nuts |
| Sold as | Single |
Vehicle fitment
Check fit against your vehicle’s year, model and trim before buying. The bolt must match the diameter, thread and the axle or spring it fastens to.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the nylon insert lock nuts supplied with this U-bolt in place of loose nuts. Measure the existing bolt’s diameter and length against the new one before installation, then tighten to the value for your vehicle.
What’s included
The package contains one U-bolt and two nylon insert lock nuts.






