Overview
The Skyjacker SKY58X312X18 is a replacement U-bolt sold as a single piece. Its E-coat is meant to resist corrosion, and two nylon insert lock nuts are supplied with it.
Skyjacker’s U-bolts come in square, round and semi-round end shapes, in lengths from 1.75 inches to 19 inches. Measure the thread, diameter and bend length of the bolt being replaced and match them to this part before fitting.
Key features
- E-coated for corrosion resistance
- Single U-bolt per pack
- Two nylon insert lock nuts included
- Designed to clamp a spring or axle
Before you buy
A U-bolt wraps around an axle or spring and holds it in place through constant flex, bumps and vibration. Because the bend radius, thread and leg length all have to match the existing clamp, compare the old bolt closely before buying a replacement. Take measurements with the bolt removed, and note whether the ends are square, round or semi-round.
Corrosion is the usual reason these bolts fail. Road salt, mud and water work into the threads and under the nuts, so a coated bolt helps slow rust. The threads still need cleaning and checking, and light penetrating oil on the nuts before removal can keep the old bolt from snapping.
After installation, re-check nut torque following the first drives, since the spring can settle and the clamp can loosen. Look for shiny wear where the U-bolt rubs the axle, cracked threads and rust streaks around the nuts. Any of these signals a worn clamp that should be replaced.
- Clean and inspect threads before fitting
- Check bend radius and leg length against the old bolt
- Replace nuts that have lost their grip
- Re-check nut torque after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKY58X312X18 |
| Product type | U-bolt |
| Finish | E-coated |
| Included hardware | 2 nylon insert lock nuts |
| Sold as | Single |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. A U-bolt has to suit the spring or axle it clamps.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the two nylon insert lock nuts that come with the bolt, and confirm the U-bolt sits square on the spring or axle before tightening. Tighten to the torque figure for your vehicle.
What’s included
One U-bolt and two nylon insert lock nuts.







