Overview
The Skyjacker SBE305 is a pair of rear extended sway bar end links for Ford F-250 and F-350 trucks. Lifting a truck changes the angle of the sway bar, and these longer links bring it back into line without relocating the mount on the frame. They replace the stock end links directly, so the existing mounting points are used.
The links are built from 4140H steel, come with new polyurethane bushings, and carry a zinc coating to resist corrosion. They are designed to improve anti-roll and sway control, and a lifetime warranty applies.
Key features
- Pair of rear extended end links for lifted Ford trucks
- 4140H steel construction with a zinc finish
- Polyurethane bushings included
- Non-adjustable design that replaces the stock links directly
- Lifetime warranty from Skyjacker
Rear suspension basics
On a solid-axle truck the rear sway bar connects to the axle housing, and the end links let the bar rotate as the axle moves over bumps. When the truck is lifted, the stock links sit at a steeper angle and can bind or wear the bushings faster. Longer links restore a more even geometry, but the lift also changes driveline angle and brake line length, so the rest of the rear end should be looked at during the install.
Leaf springs and their shackles play a part as well. Worn shackles or sagging springs change the position of the axle, which changes how the sway bar loads its links. Checking the spring hangers and shackle bushings at the same time as the links keeps the rear end working as a unit.
- Check driveline angle after raising the rear
- Inspect brake lines for stretch before and after the lift
- Look at shackle and hanger bushings during the install
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYSBE305 |
| Quantity | Pair |
| Position | Rear |
| Adjustability | Non-adjustable |
| Material | 4140H steel |
| Finish | Zinc coating |
| Bushings | Polyurethane |
| Fitment type | Direct fit |
Vehicle fitment
Skyjacker lists these links for the 1980–1998 Ford F-250 (Base, Custom, Eddie Bauer, Lariat, Ranger, Special, XL, XLS and XLT trims), the 1997 Ford F-250 HD, and the 1980–1997 Ford F-350.
Ford F-150 trucks, and F-250 and F-350 Super Duty models from 1999 on, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Skyjacker says minor drilling may be required on certain models. Remove the stock rear end links and fit the extended pair in their place, then check clearance on your truck before use.








