Overview
The Skyjacker C966SBL is a pair of front extended sway bar end links for lifted vehicles, built for a 6 inch lift. They replace the original sway bar end links and correct the sway bar angle after a lift.
Extended end links correct that angle by swapping in a longer link at the sway bar, while a drop kit corrects it by lowering the frame mounting point. The C966SBL is built from 4140H steel with a zinc coating and comes with polyurethane bushings. It is made in the USA and carries a lifetime warranty.
Key features
- Built from 4140H steel
- Durable zinc coating, which Skyjacker says blocks rust, corrosion and oxidation
- New polyurethane bushings
- Directly replaces the original end links
- Non-adjustable link type
- Skyjacker cites maximum anti-roll and sway control, with smoother handling on streets and trails
Before you install
Extended sway bar end links lengthen the connection between the sway bar and the suspension, which helps keep the bar working at a useful angle after the vehicle has been raised. When the angle is off, the bar can bind, the bushings wear faster and the handling can feel loose on the road. Choosing the right link means matching the lift height and checking that the geometry still allows full suspension travel.
Because the links change how the sway bar moves, they are often installed with a fresh set of bushings and hardware. Check the mounting points for cracks or distortion before fitting, and tighten the fasteners to the value for your vehicle once the suspension is at ride height. Recheck the links after the first few drives on rough ground.
- Inspect bushings for cracking or flattening
- Check the sway bar mounts for play
- Look for binding when the suspension cycles
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | C966SBL |
| UPC | 80369619922 |
| Position | Front |
| Quantity | Pair |
| Lift height | 6 in. |
| Material | 4140H steel |
| Finish | Zinc coating |
| Bushings | Polyurethane |
| Adjustment | Non-adjustable |
| Fitment type | Direct fit |
Vehicle fitment
The makes, models and years this pair fits are not identified. It is built for a 6 inch lift.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Minor drilling may be required on certain models, so check the mounting points against your vehicle before starting. The links replace the original end links directly. Support the vehicle securely with stands before working on the suspension.
What’s included
A pair of extended sway bar end links with polyurethane bushings.











