Overview
The Skyjacker Sway Bar Extended End Links, part number SBE303, are front extended sway bar end links for the 1980-1998 Ford F-250 and 1980-1985 Ford F-350.
Skyjacker says extended end links correct the angle of the sway bar once the vehicle has been lifted. Unlike a sway bar drop kit, which lowers the mounting point on the frame, you remove the stock end links and replace them with the proper extended links. The links include polyurethane bushings.
Key features
- Front, non-adjustable extended sway bar end links
- Corrects sway bar angle after lifting the vehicle
- Built from 4140H steel
- Zinc coating to block rust, corrosion and oxidation
- New polyurethane bushings
- Directly replaces stock end links
- Minor drilling may be required on certain models
- Lifetime warranty and made in the USA.
Before installing extended links
Extended end links keep the sway bar at a workable angle when the suspension has been raised. The bar connects to the axle through the end links, and a lift moves the axle down, which changes that angle and can cause the bar to bind. Extended links keep the geometry closer to stock, while a drop kit works by lowering the mounting point on the frame, a different approach to the same problem.
Replace the links in pairs so both sides of the sway bar carry the same load. Old links often have worn bushings or bent studs, so inspect the sway bar brackets and bar bushings during the same job. Check that steering and brake hoses have clearance through the full range of the suspension.
- Replace both front links together
- Inspect sway bar bushings and brackets
- Check hoses and lines for clearance
- Re-check torque after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SBE303 |
| UPC | 803696157672 |
| Product type | Sway bar end links (non-disconnect) |
| Position | Front |
| Type | Non-adjustable |
| Material | 4140H steel |
| Finish | Zinc coating |
| Bushings | Polyurethane |
| Warranty (per manufacturer) | Lifetime warranty |
| Origin (per manufacturer) | Made in the USA |
| Fitment type | Direct fit |
Measure your current links against the new ones if clearance is tight in your build.
Vehicle fitment
The manufacturer fitment list for the Skyjacker SBE303 end links covers:
- 1980–1998 Ford F-250 (Base, Custom, Eddie Bauer, Lariat, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT, XLT Lariat)
- 1980–1985 Ford F-350 (Base, Custom, Ranger, Ranger Lariat, Ranger XLT, XL, XLS, XLT, XLT Lariat)
Compare part number SBE303 with your vehicle’s year, model, trim, engine and drivetrain before ordering so you receive the correct part.
It is a direct fit for the F-250 from 1980 to 1998 and the F-350 from 1980 to 1985. Later F-350 years fall outside its fit range, so check your truck’s details before buying.
Installation notes
- Professional installation is recommended for suspension, steering and brake components.
- Torque every fastener to the correct specification for your vehicle and re-check it after the first miles of driving.
- Have the alignment checked after any suspension or steering work, and check that tires, hoses and lines have clearance through the full range of travel.
What’s included
Extended sway bar end links with polyurethane bushings.








