Overview
The Crown Automotive 5093111AA is a front sway bar link for 2003–2005 Dodge Ram 2500 and 3500 trucks. It is built for DR, DH and DX model codes, 2500 and 3500 models, and 4WD vehicles.
Key features
- Front position sway bar link
- Named model codes: DR, DH and DX
- Fits 4WD applications
- Direct fit listed by the manufacturer
Front link wear signs
The front sway bar link carries side loads from the sway bar to the suspension, so it works hard whenever the truck leans in a turn or climbs uneven ground. Heavier trucks put more strain on these links, especially when hauling or towing.
Common signs of wear include a knock over bumps, clunks when turning, and wandering at highway speeds. Look for torn boots, play at the ball joint ends, and bent link bodies. When one link is worn, the other side often shows the same wear, so inspect both at once.
On a 4WD truck, check the link during any front end work, since the drivetrain adds weight and movement at the axle. Tighten fasteners to the values in your service manual after installation.
- Check both sides at the same time
- Look for torn or cracked boots
- Note any noise on rough roads
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 5093111AA |
| UPC | 848399035100 |
| Position | Front |
| Drivetrain | 4WD |
| Fitment type | Direct fit |
Vehicle fitment
Covers 2003–2005 Dodge Ram 2500 (Laramie, SLT and ST) and 2003–2005 Dodge Ram 3500 (Laramie, SLT and ST).
Ram 1500 models and 2006 and later Ram trucks are not in the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the hardware against your installation when the package arrives, before starting the job.
