Overview
The Skyjacker 182-N is a suspension lift kit with shock that provides a 2 in. front lift and includes Nitro shocks. It is a direct fit kit, so verify the year, make, model and chassis before installing.
The kit comes with a Limited Lifetime Warranty. Rear ride height is not covered by the front lift, so check it separately after installing.
Key features
- 2 in. front lift
- Nitro shocks included with the kit
- Suspension lift kit with shock
- Limited Lifetime Warranty from the manufacturer
Shock and front geometry
Lifting only the front changes front suspension geometry while the rear stays at its original height. That difference alters the balance of the vehicle, so check rear ride height and rear suspension condition after the front is installed. Front alignment, steering angles and driveline angles also shift and should be checked by a shop with the right equipment.
Nitro shocks are the kit’s shock component. Shocks lose damping as seals and valves age, so look for fluid leakage, bouncy handling or fade on rough roads. Shocks on the same axle are usually replaced in pairs to keep control balanced. Check mounting hardware and bushings whenever the shocks are serviced.
- Check rear ride height after the front is lifted
- Re-check front alignment and steering angles
- Inspect shock mounts and bushings during service
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 182-N |
| UPC | 700007063081 |
| Lift height | 2 in. front |
| Shock type | Nitro |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
Fit for a specific vehicle has not been confirmed. Verify your year, make, model and chassis before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lifting only the front changes front suspension geometry, so the alignment and driveline angles should be checked once the kit is in.
What’s included
The lift kit with shock, including Nitro shocks.
Not included: Other parts beyond the kit are needed for a complete set. Check the package contents against your installation before starting.









