Overview
The Pro Comp 6 Inch Long Arm Lift Kit with Pro Runner Shocks, part number K2078BP, is a 6-inch long arm lift for Dodge Ram 2500 and 3500 trucks with the 6.7L diesel engine. It is a stage 2 lift with a lift height range of 5 to 6.99 inches.
The front uses coil springs with upper and lower long arm control arms, and the steering correction is a drop pitman arm. This version uses Pro Runner front shocks in place of the ES9000 shocks in the K2078B. The kit also includes an adjustable front track bar and a front track bar bracket. The rear uses lift blocks and U-bolts, and the lift height range is 5 to 6.99 inches.
Key features
- 6-inch stage 2 long arm lift
- Built for the 6.7L diesel engine
- Coil springs with upper and lower long arm control arms
- Pro Runner front shocks, included
- Adjustable front track bar and track bar bracket
- Drop pitman arm steering correction
- Rear lift blocks with U-bolts
Long arm geometry and steering
Long arm control arms take over the job of locating the front axle while the coil springs carry the load, so the geometry of the upper and lower arms controls camber and caster. A drop pitman arm adjusts the steering geometry to suit the new front height. Together these parts change how the truck tracks and how the steering responds, which is why the front end is best set up as one system.
The adjustable track bar keeps the axle centered under the body as the suspension moves, so it should be checked for play at both ends. Bushings and bracket bolts wear with use, especially on rough roads and towing. Inspect the steering stabilizer, drag link and tie rods during routine service.
- Check track bar ends for play
- Inspect control arm bushings regularly
- Set alignment after the install
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2078BP |
| UPC | 70000637823 |
| Engine | 6.7L diesel |
| Lift height | 6 inches, stage 2 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Long arm |
| Steering correction | Drop pitman arm |
| Rear lift | Blocks and U-bolts |
| Front shocks | Pro Runner |
| Shocks included | Yes |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2009-2010 Dodge Ram 2500 and 3500 and the 2011-2013 Ram 2500 and 3500 in the trims covered for each year. Ram 1500 trucks and 2008 and earlier Ram 2500 and 3500 models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Ram 1500 trucks and 2008 and earlier Ram 2500 and 3500 models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Long arm control arms and a drop pitman arm change the front suspension and steering geometry, so have the alignment and steering checked after installation.
What’s included
The kit includes front coil springs, upper and lower long arm control arms, an adjustable front track bar, a front track bar bracket, a drop pitman arm steering correction, rear lift blocks with U-bolts, and Pro Runner front shocks.









