Overview
The Skyjacker JL15RBPBLT is a Rubicon version of the 1 to 1.5 inch coil spring lift for the 2018 Jeep Wrangler JL Unlimited Rubicon, four-door. It uses dual rate long travel coil springs at the front and rear, and it includes four Black MAX long travel shocks. The listed lift height range is 0 to 2.25 inches.
The Rubicon kit uses left and right coil rates designed for the JL. The first rate gives a highway ride, and the second engages after compression. The coils expand during articulation as the suspension droops, so each coil stays in the upper bucket at full droop. The second rate gives control through body roll and heavy off-road movement.
The package includes extended front sway bar end links for full droop, bump stop extensions for clearance at bump, and Grade 8 mounting hardware. The Black MAX shocks are length fitted to the maximum extension allowed for full articulation. The kit carries a limited lifetime warranty.
Key features
- Dual rate long travel coil springs, front and rear
- Left and right coil rates specific to the JL
- Four Black MAX long travel shocks
- Extended front sway bar end links
- Front and rear bump stop extensions
- Grade 8 mounting hardware
Tire size and articulation
Tire size works together with the lift and the shocks to determine how the suspension moves. Larger tires need more clearance at the fender, inner liner and steering stops, especially at full compression or full articulation. The kit’s listed street and off-road figures show the two different tire sizes the setup is built around, so pick the tire that fits the driving you do most.
Bump stop extensions and sway bar end links control how far the suspension travels before it stops. Inspect the extensions for cracks and loose mounts after the first off-road trip, and make sure they clear the tires at full bump without binding. Tire rotation and balance also matter after a lift, because uneven wear can show up quickly once the suspension moves through a larger range.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JL15RBPBLT |
| UPC | 803696256559 |
| Suspension type | Coil spring kit |
| Lift range | 0 to 2.25 inch |
| Front shocks | Black MAX, four included |
| Max tire size | 37 x 12.50 street articulation, 35 inch off-road full articulation |
| Recommended wheel | 9 inch with 0 offset |
| Warranty | Limited lifetime |
| Fitment type | Direct fit |
Vehicle fitment
The listed fitment is the 2018 Jeep Wrangler (JL) Unlimited Rubicon. The kit is a four-door Rubicon application.
The non-Rubicon version uses part number JL15BPBLT, and two-door Wrangler JL models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the alignment and driveline angles after installation, since a lift of this height changes both. Install the bump stop extensions and the extended sway bar end links with the coils so the travel and clearance match the design.
What’s included
Dual rate long travel coil springs front and rear, four Black MAX long travel shocks, front extended sway bar end links, front and rear bump stop extensions, and Grade 8 mounting hardware.














