Overview
The Skyjacker 4.5 Inch Suspension Lift Kit with Black Max Shocks, part number TU745BKB, is a direct-fit lift kit for the Toyota Tundra. It fits 2007–2019 Tundra models in the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims.
The rear uses Black MAX shocks and a block and U-bolt lift. The lift height range is 4 to 5.5 inches. The kit does not include front shocks.
Key features
- Rear block and U-bolt lift
- Black MAX rear shocks
- Lift height range of 4 to 5.5 inches
- Direct-fit design
Rear block and U-bolt basics
A block and U-bolt rear lift raises the axle on the existing leaf springs, so the axle sits higher and the driveline angle changes. The U-bolts clamp the axle to the springs, and their nuts carry the load that holds the lift in place. Check the clamping hardware each time the rear end is serviced.
A taller rear can shift brake line length and the angle of the rear driveshaft. Check the brake hoses for tension and the driveshaft for vibration after the first drives. Front shocks left from the factory may feel different with a higher rear, so judge the ride on a familiar road before heading off road.
- Re-torque U-bolt nuts after the first drives
- Check brake hose length after lifting the rear
- Inspect the driveshaft for vibration at each service
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | TU745BKB |
| Lift | 4.5 inch (title) |
| Lift height range | 4 to 5.5 inches |
| Rear lift method | Block and U-bolt |
| Rear shocks | Black MAX |
| Front shocks | None |
Vehicle fitment
It fits the 2007–2019 Toyota Tundra in the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims.
Tundra years outside 2007–2019 and other Toyota models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear lift uses a block and U-bolt arrangement, so check the U-bolt fit against your rear axle. Front shocks are not included, so confirm that your existing front shocks suit the new height.









