Overview
The Skyjacker D640SSK is a 4 inch lift kit for the front and rear of a truck. The front uses strut spacers, steering knuckles and a drive shaft spacer to raise the front end, and the rear is lifted with blocks and U-bolts. The kit also includes sway bar end links, a front and rear cross member and a differential skid plate. The lift height range runs from 3 to 4.99 inches.
Suspension type is knuckle, with lift blocks and U-bolts at the rear. Shocks are not included, so plan to use existing shocks checked for length or separate shocks sized for the new height.
Key features
- 4 inch lift for the front and rear
- Front strut spacer and steering knuckles
- Drive shaft spacer
- Sway bar end links
- Front and rear cross member and differential skid plate
Before you install the kit
A front lift with knuckles and strut spacers changes how the steering and the axles sit, so the work goes beyond bolting parts on. Steering geometry moves when the knuckles are fitted, and camber and toe should be re-checked on an alignment rack. Drive shaft angles change at the drive shaft spacer and at the rear blocks, which can add vibration if they are left unchecked.
Before ordering, compare the package contents with your installation plan, and make sure you have the hardware and tools the job needs. Lifting the front and rear puts more load on shocks and joints, so inspect the ball joints, tie rod ends and U-bolts while the truck is raised. Retorque the U-bolt nuts after the first few drives, since clamps settle as the parts seat.
- Alignment after knuckle installation
- Driveline angles at the spacer and blocks
- U-bolt nuts retorqued after early drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | D640SSK |
| UPC | 70000638914 |
| Lift height range | 3 to 4.99 inch |
| Suspension type | Knuckle |
| Rear lift method | Lift blocks and U-bolts |
| Shocks | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Fit depends on the vehicle’s year, model and trim, so confirm those before ordering the strut spacers and knuckles.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front uses steering knuckles, which change the steering geometry, so check the steering and alignment after the front components are installed. Recheck the driveline angles at the drive shaft spacer and at the rear lift blocks.
What’s included
Front strut spacers, steering knuckles, a drive shaft spacer, sway bar end links, rear blocks and U-bolts, front and rear cross members, and a differential skid plate.
Not included: shocks.









