Overview
The Skyjacker C125BK is a 2.5 in. suspension lift kit for 1973 through 1987 Chevrolet and GMC trucks, including the Chevrolet K20 and V20, the GMC K25, K2500 and V2500, and their Suburban versions. It raises the truck with front leaf springs, a rear block and U-bolt hardware.
The components are finished in black powder coat to resist corrosion. The kit is designed as a direct fit for the trucks in the fitment section below.
Key features
- 2.5 in. lift height
- Front leaf springs included
- Front and rear U-bolt kits included
- Bushing kit and rear block included
- Black powder coated components
Leaf springs and axle alignment
Leaf springs carry a lot of load through their clips and bushings, so installation needs careful attention to how the pack seats. Confirm the spring eyes are centered, the bushings move freely and the U-bolts are tightened evenly across each axle. Uneven clamping can cause the axle to sit off square, which shows up as steering pull or uneven tire wear on the front tires.
Older trucks often have worn spring hangers, tired shackles and dry bushings, so inspect those components while the old springs are off. Replacing them at the same time helps the new height last longer. After the first few drives, re-torque the U-bolts and look for leaks, cracks or rubbing near the springs, which are the first signs that something has shifted.
- Check spring eyes and bushings for wear
- Torque U-bolts evenly on both sides
- Recheck clamp hardware after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | C125BK |
| UPC | 803696117638 |
| Lift height | 2.5 in. |
| Included hardware | Front leaf springs, front and rear U-bolt kits, bushing kit, rear block |
| Finish | Powder coated black |
Vehicle fitment
Skyjacker’s list covers the 1973–1986 Chevrolet K20 and the 1987 Chevrolet V20, the 1973–1978 GMC K25 and K25/K2500, the 1979–1986 GMC K2500, the 1987 GMC V2500, a 1986 GMC C2500 Suburban, and Suburban versions of these, with trims such as Custom, Deluxe, Scottsdale, Silverado and Sierra Classic.
Later model years and any model not named in the list are outside this fitment. Read the trim names carefully against the list before installing.
Installation notes
Leaf spring work requires the U-bolts and bushings to seat correctly, so have the axle position and driveline angles checked once the kit is installed. Lift kits of this type also change alignment, so schedule an alignment afterward.
What’s included
The kit includes front leaf springs, front and rear U-bolt kits, a bushing kit and a rear block. Not included: Other parts are needed to complete the set, and they are not included with the kit. Check the package contents against your installation before starting.









