Overview
The Pro Comp 3.5-inch Lift Kit with PRO-VST 2.5-inch Coilovers and Shocks with Rear Coil Spacers and Upper Control Arms, part number K5098BXU (EXPK5098BXU), is a 3 to 3.5-inch lift for the Toyota 4Runner and FJ Cruiser. It fits 2003 to 2024 4Runner models and 2007 to 2014 FJ Cruiser models, a wider span than the 2003 to 2009 kits in the same line.
The kit uses PRO-VST front and rear shocks, which are included, along with 2.5-inch PRO-VST coilovers and upper control arms. Confirm which rear lift parts ship before ordering.
The system is tuned for 33-inch tires on 17-inch wheels, with a lift height range of 0 to 3.5 inches. It improves travel and rebound while keeping the truck’s geometry in line for larger tires. The upper control arms are American-made Pro Series arms with high-angle ball joints.
Key features
- 3 to 3.5-inch lift
- PRO-VST front and rear shocks, included
- 2.5-inch PRO-VST coilovers
- Rear coil spacers.
- Upper control arms.
- Tuned for 33-inch tires on 17-inch wheels
Choosing the right setup
A coilover and shock lift changes how the suspension works at every corner, so the shocks, springs and control arms should be matched as a set. Upper control arms are often replaced alongside a lift like this one because stock arms were not designed for the new ride height and can bind or wear unevenly once the geometry changes.
Before buying, consider how you use the truck. Trail driving puts heavy loads on shocks and their mounts, while daily driving benefits from smooth damping. Plan a full inspection of brake lines, steering linkage and driveline angles at the first service interval after the install.
- Inspect shock mounts for cracks after rough trail runs
- Replace worn bushings whenever control arms are changed
- Recheck hardware torque after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK5098BXU (title K5098BXU) |
| Suspension type | Lift kit |
| Lift | 3 to 3.5 inches |
| Lift height range | 0 to 3.5 inches |
| Shocks | PRO-VST, front and rear, included |
| Coilovers | 2.5-inch PRO-VST |
| Rear lift method | Coil springs (specification list) |
| Rear lift component | Coil spring spacers |
| Tire size | 33 inch |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2003-2024 Toyota 4Runner and the 2007-2014 Toyota FJ Cruiser.
Models outside those year ranges, including the 4Runner before 2003 and the FJ Cruiser from 2015 on, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is a direct fit. Because the lift changes the alignment and the driveline angles, plan a wheel alignment and a driveline check after the install.
What’s included
The kit includes the lift with PRO-VST front and rear shocks, 2.5-inch coilovers, the rear coil spacers and upper control arms. Check the rear parts in the package against your installation before starting.















