Overview
The Skyjacker JK200BPHSR is a 2 to 2.5 inch Softride coil spring lift kit with Hydro 7000 shock absorbers for 2-door 2007-2018 Jeep Wrangler JK models. Its softer rate front and rear coils are designed to keep the stock ride when the vehicle is lifted. It fits the Wrangler JK in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
The product bullets specify 2-door models, and the spec sheet gives a lift height range of 3 to 4.99 inches, which is higher than the 2 to 2.5 inch name, so check the lift height before choosing this kit over a 2 inch option.
Skyjacker’s description says its kits for 2007-2015 Wrangler JK models were tested and certified compliant with FMVSS 126, with the suspension changes checked to keep Electronic Stability Control working as designed. The Hydro 7000 shock in this kit is the hydraulic option, and the manufacturer also offers Nitro Gas and M95 Series Monotube shocks on this coil design.
Key features
- Softride coil springs front and rear for a smoother ride than a standard coil
- Hydro 7000 shock absorbers included
- Rear track bar bracket and bumpstop relocation included
- Hot wound 5160 spring material
- Preset solid to allow full coil bind and reduce sag
- Shot peened for tensile strength
- Maximum tire size 33 x 12.50
Softride coil setup basics
Coil spring lifts keep the factory shock and link geometry while raising the body, which makes them a practical choice for daily driving and light trail use. Softer rate springs aim to hold ride quality, but the truck still rides firmer when loaded than it does stock, so spring seating and bump stop contact should be checked after installation.
Rear track bar brackets and bumpstop relocation help keep the rear axle centered, and they are often replaced together with coils. Front track bar and steering stabilizer wear is worth inspecting at the same time, since front height changes after the lift. Hydro shocks handle rebound on uneven ground, so check mounts and leaks at regular service intervals, especially after off-road use.
- Track bar bushings and bracket bolts checked
- Bump stop contact at full compression
- Shock mounts and leaks checked after off-road use
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JK200BPHSR |
| UPC | 803696222226 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Coil spring kit |
| Rear lift method | Coil springs |
| Shocks | Hydro 7000 |
| Spring material | Hot wound 5160 |
| Maximum tire size | 33 x 12.50 |
Vehicle fitment
It fits 2007-2018 Jeep Wrangler JK 2-door models in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims. Four-door Wrangler Unlimited models are not covered. Confirm your vehicle’s year, model and trim before ordering.
The four-door Wrangler Unlimited is not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes a rear track bar bracket and bumpstop relocation, which are needed to keep the rear axle centered with the lift. Check the front track bar and steering stabilizer after installation.
What’s included
The kit includes front and rear Softride coil springs, a rear track bar bracket, bumpstop relocation parts and Hydro 7000 shock absorbers.









