Overview
The Skyjacker Softride Nitro Shock Absorber, part number N8061, is a front twin tube shock for suspension lifts of 7 to 9 in. It fits 1970 to 1976 Ford F-100, 1977 to 1979 and 1997 to 2003 Ford F-150, the 2004 Ford F-150 Heritage in XL and XLT trims, 1978 to 1979 Ford Bronco and 1987 to 1995 Jeep Wrangler (YJ).
The shock is pressurized with 150 PSI of nitrogen gas and uses multi-stage velocity sensitive valving, an oversized piston head and an internal rebound bumper. The 5/8 diameter hardened double chrome rod runs on urethane bushings. The valving and compression control suit heavy-duty, severe off-road use, and the shock runs a little stiff for most street applications.
Key features
- 150 PSI nitrogen gas pressurized
- Multi-stage velocity sensitive valving
- Twin tube construction with oversized piston head
- Internal rebound bumper
- 5/8 diameter hardened double chrome rod
- Urethane bushings and compression control
- White body with red polyurethane boot
Lift height and shock stroke
Front shocks for a suspension lift have to match the extended and collapsed lengths the lift creates. A shock that is too short can bottom out on bumps, while one that is too long can strain the mounts. Measuring the new ride height before fitting helps set the correct working range.
Stroke determines how far the piston can travel inside the tube, so a longer stroke suits trails with big hits and a shorter one suits paved roads. Check the eye orientation and mounts against the original front shock, and inspect the boot and bushings after the first few drives. Front shocks are often replaced as a pair.
- Measure ride height after the lift is installed
- Check that the shock is not bottoming out on bumps
- Inspect bushings and boots after the first few drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8061 |
| UPC | 803696153360 |
| Shock series | Nitro Series |
| Position | Front |
| Charge | 150 PSI nitrogen gas |
| Construction | Twin tube |
| Collapsed length | 17.42 in |
| Extended length | 30.46 in |
| Shock stroke | 13.04 in |
| Rod | 5/8 diameter, hardened, double chrome |
| Lift height | 7 to 9 in |
| Sold as | Individually |
Vehicle fitment
It fits the 1970 to 1976 Ford F-100, 1977 to 1979 and 1997 to 2003 Ford F-150, the 2004 Ford F-150 Heritage (XL and XLT), 1978 to 1979 Ford Bronco and 1987 to 1995 Jeep Wrangler (YJ) in several trims. Check year, model and trim against this fit before ordering, particularly for Ford F-150 models from 1980 to 1996 and other 2004 F-150 trims.
The list does not include Ford F-150 models from 1980 to 1996 or standard 2004 F-150 trims, and it does not include Jeep Cherokee or later Wrangler generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is for suspension lifts and does not lift the vehicle, so the 7 to 9 in lift must already be in place. Check the mounting points against the original front shock before fitting the N8061.
What’s included
One front shock absorber with a red polyurethane boot.
Not included: the opposite front shock, because the product is sold individually.









