Overview
The Skyjacker Softride Hydro Shock Absorber H7061 is a front hydraulic shock in the Hydro Series, made for suspension lifts from 7 to 9 in. Its collapsed length is 17.42 in, its extended length is 30.46 in and its shock stroke is 13.04 in, which gives it long travel among the front Hydro shocks in this family.
Hydraulic action and multi-stage velocity sensitive valving control the damping. An expanded fluid reservoir and oversize piston head help the shock keep steady performance. The heavy-duty twin tube body carries a 5/8 inch hardened double chrome rod, and it is a direct fit for the models covered below.
Key features
- Hydraulic action with variable resistance
- Multi-stage velocity sensitive valving
- Heavy-duty twin tube construction
- 5/8 inch diameter hardened double chrome rod
- Internal rebound bumper and oversize piston head
- Tough polyurethane bushings
- Expanded fluid reservoir to reduce foaming
Front suspension travel
A front shock with long travel is useful when the suspension moves through a wide range, such as a large lift on rough terrain. At full extension it keeps the tire in contact with the ground, which helps traction when the front axle articulates.
Front shocks also control steering feel and braking pitch, so a worn unit can make the front end wander or dive under hard braking. Keep the damping consistent on both sides and check the rod for pitting that could damage the seal. Clean the boot and rod after mud or water crossings to protect the seal from grit.
- Check the front bushings for splits and wear
- Look for fluid leaks along the body and rod
- Confirm steering components move freely after installation
- Recheck mounting hardware after the first few trail runs
Specifications
| Brand | Skyjacker |
|---|---|
| Series | Hydro Series |
| Part number | H7061 |
| UPC | 803696140353 |
| Position | Front |
| Lift range | 7 to 9 in |
| Damping | Hydraulic |
| Body | Heavy-duty twin tube |
| Piston rod | 5/8 inch diameter, hardened double chrome |
| Collapsed length | 17.42 in |
| Extended length | 30.46 in |
| Shock stroke | 13.04 in |
| Fitment type | Direct Fit |
Vehicle fitment
It fits 1970–1976 Ford F-100, 1978–1979 Ford Bronco, 1977–1979 and 1997–2003 Ford F-150 models, a 2004 Ford F-150 Heritage in XL and XLT trims, and 1987–1995 Jeep Wrangler (YJ) models in several trims.
The list does not include Ford F-150 trucks from 1980 to 1996. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that your suspension lift falls within the 7 to 9 in range before installation, and compare the 30.46 in extended length with your installed geometry. Support the vehicle on jack stands while working on the front suspension.
What’s included
One front shock absorber.
Not included: the suspension lift kit that brings the vehicle into the 7 to 9 in range, plus any hardware needed for installation.









