Overview
The Skyjacker H7023 is a Softride Hydro hydraulic shock absorber, part number H7023, built for a suspension that has already been lifted. It fits the 1987-1995 Jeep Wrangler (YJ) and 1999-2002 Jeep Grand Cherokee (WJ) as a rear shock with a 2 inch lift, and it can also be used front or rear.
Its twin tube body and multi-stage velocity sensitive valving are designed for a comfortable street ride that still feels firm enough for most off-road trail use. It is intended for use with most Skyjacker lift kits. Each shock comes with red polyurethane bushings and a red boot, and it is sold one at a time.
Key features
- Hydraulic action with multi-stage velocity sensitive valving
- Heavy-duty twin tube construction
- 5/8 inch diameter hardened double chrome rod
- Oversize piston head and internal rebound bumper
- Expanded fluid reservoir, which Skyjacker says helps keep damping steady with less foaming
- Red polyurethane bushings and a red boot
- Heavy mileage white paint with a minimum 240-salt protection rating
Before you buy
A shock absorber controls how fast the spring compresses and rebounds, and on a suspension that has been lifted that control matters more. Shocks mounted on a lift often work with longer travel, so compare the old unit with the new one before the vehicle goes on the trail. Replacing both shocks on the same axle keeps damping even from side to side and avoids one side feeling firmer than the other.
Inspect the bushings, boot and mounting hardware on the old shocks before removing them. Worn bushings cause rattles and loose handling, and a torn boot lets grit reach the rod. Trucks that see rocky trails often replace the bump stops and sway bar links at the same time, since those parts take the same loads.
- Check the lift height before ordering
- Replace shocks in pairs on the same axle
- Look for leaks on the body and rod
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7023 |
| UPC | 803696135458 |
| Shock series | Hydro Series, hydraulic |
| Mounting position | Front or rear |
| Collapsed length | 13.71 in. |
| Extended length | 22.58 in. |
| Shock stroke | 8.875 in. |
| Piston rod | 5/8 in. diameter, hardened double chrome |
| Body | Heavy-duty twin tube |
| Bushings and boot | Red polyurethane bushings, red boot |
| Finish | Heavy mileage white paint, minimum 240-salt protection |
| Sold as | Each, sold individually |
Vehicle fitment
It fits the 1987-1995 Jeep Wrangler (YJ) and 1999-2002 Jeep Grand Cherokee (WJ), both as a rear shock with a 2 inch lift. CJ models from 1955 to 1986 also have applications for front or rear use depending on lift height. Confirm fit for your CJ’s year, model and trim before ordering.
Not covered: Wrangler TJ, JK and later models, and Cherokee XJ. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a suspension lift shock, so it is only suitable once the vehicle has a 2 inch lift. Each unit is sold individually, so plan one per position. Use jack stands before working under the vehicle.
What’s included
One shock absorber with red polyurethane bushings and a red boot. Not included: the suspension lift kit the shock is designed for, and any additional shocks needed for a full set.









