Overview
The Skyjacker B8388 is a rear Black MAX shock absorber for a 2 to 4 inch lift on the 2019 Jeep Wrangler JL. It is a twin tube hydraulic shock built with vehicle-specific multi-stage valving, and it is sold as a single shock.
Skyjacker’s foam-cell body allows the B8388 to be mounted at 180 degrees, and the foam compensates for oil expansion as the shock heats up.
Key features
- Rear position for the Wrangler JL
- Built for a 2 to 4 inch lift
- Vehicle-specific multi-stage valving
- Increased fluid capacity for MAX heat dissipation
- Twin tube construction
- Sintered iron piston and chrome-plated shaft
- Black boot included
Rear ride height and shock life
Rear shocks control body motion over bumps and help the axle return to position after a jolt. Their working life depends on how much heat and load they see, so a shock on a heavily used trail vehicle often needs earlier inspection than one used mostly on pavement. Keeping track of the ride height on both sides makes it easier to spot a shock that has lost control.
When the rear is raised, the shock geometry and the suspension angles change. Worn bushings and tired springs can make a new shock feel too soft or too firm, so check those parts while the old shock is removed. A matched pair of rear shocks keeps the rear end level and predictable.
- Record rear ride height before removal
- Check bushings and spring condition
- Inspect the old shock for leaks before discarding
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYB8388 |
| Shock series | Black MAX |
| Position | Rear |
| Lift range | 2 to 4 inch |
| Shock type | Twin tube, hydraulic |
| Boot | Black, included |
| Warranty | Limited lifetime warranty |
Vehicle fitment
It fits the 2019 Jeep Wrangler JL in both two-door and Unlimited four-door models, including Rubicon, Sport, Sport S, Sahara and Rubicon Unlimited versions.
It fits only the 2019 model year of the JL, so 2018 and 2020 and later years are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this rear shock is rated for a 2 to 4 inch lift, check the lift height on your Jeep before ordering. Have the alignment checked after the rear shock is replaced.
What’s included
The SKYB8388 comes with its black boot. Check the mounting hardware on your Jeep before starting the installation.
Not included: a second SKYB8388 shock, sold separately.








