Overview
The Skyjacker M95 Performance Monotube Shock Absorber, part number M9517, is a front gas-charged monotube shock rated for 0 to 2 in of lift. Its manufacturer fitment list covers a long run of Chevrolet, GMC, Dodge and Ram trucks and SUVs from 1961 through 2018, plus the 1974 to 1981 Plymouth Trailduster and the 2003 to 2009 Hummer H2.
In a monotube shock, a floating piston separates the oil from the high pressure nitrogen gas inside one main tube. The single tube design keeps operating temperatures cooler under extreme conditions. The 46mm bore, internal bump stop and 180 degree directional mounting are part of the M95 Performance line, and this shock is made for the front position.
Key features
- Monotube body that Skyjacker says runs cooler under extreme conditions
- High pressure nitrogen gas charge with a floating piston
- Large 46mm bore
- Internal bump stop
- 180 degree directional mounting
- Lift range of 0 to 2 in
- Shock boot included
Front suspension on older trucks
Older Chevrolet, GMC, Dodge and Ram trucks often carry heavier front ends and older bushings, so shock wear shows up as sway, nose dive under braking and tires that cup. A monotube design with a gas charge keeps damping steadier as the shock heats up on long grades or repeated bumps.
Classic trucks benefit from checking the whole front end before fitting a new shock. Ball joints, tie rod ends and control arm bushings affect how the shock works, and worn parts can shorten the life of a new unit. Compare the mounting points with the original shock so the eye orientation and stud spacing line up before final tightening.
- Check ball joints and tie rod ends for play
- Inspect control arm bushings before fitting
- Confirm the original mounting hardware fits before reusing it
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | M9517 |
| UPC | 803696211459 |
| Shock series | M95 Performance |
| Position | Front |
| Construction | Gas monotube |
| Charge | Gas charged, high pressure nitrogen |
| Bore | 46mm |
| Mounting | 180 degree directional |
| Bump stop | Internal |
| Lift height | 0 to 2 in |
| Included | Shock boot |
| Sold as | Each |
Vehicle fitment
It fits 1999 to 2013 and 2018 Chevrolet Silverado 1500, 2000 to 2013 Chevrolet Tahoe, Suburban 1500 and Yukon XL 1500, 2002 to 2006 Chevrolet Avalanche, 1999 to 2013 and 2018 GMC Sierra 1500, 1994 to 2010 Dodge Ram 2500 and 3500, and 2011 to 2013 and 2015 to 2018 Ram 1500, plus many classic Dodge D-series and W-series trucks from 1961 onward. Before ordering, match your year, model and trim, paying close attention to 2014 to 2017 Silverado 1500 and Sierra 1500 applications.
The list has no 2014 to 2017 Silverado 1500 or Sierra 1500 entries, and no Jeep or Ford models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is directional with 180 degree mounting, so confirm the eye orientation before installing it. Several listed models are older classic trucks, so compare the mounting points with the original shock first.
What’s included
One shock absorber with a shock boot, sold as each.







