Overview
The Pro Comp Suspension 99-250 is a 2.5 degree shim made from alloy aluminum. Pro Comp designed it to help align driveline angles when lifted leaf springs are used.
Measuring driveline angle
Driveline angle is the difference between the pinion angle and the transmission or transfer case output. When a lift tilts the rear axle, that difference grows and can cause vibration. A degree shim is one way to bring the angles closer together, so measuring both angles before and after a change shows whether the shim is doing its job.
Seat the shim on the spring pad in the orientation your spring setup calls for, then re-check the U-bolt torque after the first drive. Tilting the axle too far can also strain the driveshaft joints, so check them for wear whenever a shim is added.
- Measure pinion and transmission angles before fitting
- Confirm the shim sits flat on the spring seat
- Re-check U-bolt torque after the first drive
- Inspect driveshaft joints for wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 99-250 |
| UPC | 614901133400 |
| Angle | 2.5 degrees |
| Material | Alloy aluminum |
| Quantity | Sold individually |
Vehicle fitment
Match the shim to your leaf spring axle before ordering, since the 2.5-degree angle it adds should be the correction you need.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A degree shim changes the pinion angle, so measure the driveline angles after installation to confirm the change is what you need.
What’s included
A single shim, sold individually.











