Overview
The Skyjacker RBL42 (part number SKYRBL42) is a single stainless steel braided rear brake line for the 1974-1975 Jeep CJ5 and CJ6, made for a 2.5 to 4 inch lift.
The hose is built with a brass fitting and a polyurethane outer coating. It carries DOT certification and European T.U.V. approval, and it is covered by a limited lifetime warranty.
Key features
- Rear position, one hose
- Stainless steel braided hose
- Heavy-duty off-road brass fitting
- Extruded polyurethane coating
- DOT certified and European T.U.V. approved
- Limited lifetime warranty
Choosing hoses for a lift
A lift changes the geometry between the frame and the rear axle, so the brake hose has to cover a longer path through each suspension cycle. On an older CJ, the stock hose was not designed for that movement, and it can kink or rub once the axle sits higher. A braided stainless hose with a polyurethane coating is a common upgrade because it resists swelling and abrasion better than a worn rubber line.
Before ordering, measure the existing hose length and compare the fitting ends with your axle and frame brackets. Brake work is often done alongside related parts, such as brake lines at the frame junction and the rear drum or caliper hardware. Inspect those parts while the wheel is off, and bleed the system after any hose replacement.
- Check hose routing for rub points after the lift
- Bleed the brakes after replacing the hose
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYRBL42 |
| Product type | Stainless steel braided brake hose |
| Hose material | Stainless steel |
| Fitting | Heavy-duty off-road brass |
| Outer coating | Extruded polyurethane |
| Position | Rear |
| Lift height | 2.5 to 4 inches |
| Quantity | Individual (one hose) |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1974-1975 Jeep CJ5 (Base, Renegade) and the 1974-1975 Jeep CJ6 (Base).
Other CJ model years are not on the list. Confirm your vehicle’s year, model and trim before ordering.









