Overview
The Skyjacker RBL99 is a rear stainless steel brake line sold as a single, suited to lift heights of 4 to 8 inches. It is a braided stainless steel hose with heavy duty off-road brass fittings and an outer extruded polyurethane coating, with a lifted length and a size of 6 inches plus.
Skyjacker describes DOT certification, European T.U.V. approval and street legal use in 50 states. No vehicle years, makes or models are named, so fit should be checked against your own vehicle.
Key features
- Single rear line, not a pair
- Braided stainless steel hose
- Heavy duty off-road brass fittings
- Outer extruded polyurethane coating
- DOT certified and European T.U.V. approved
- Limited lifetime warranty.
Rear line routing and checks
A rear brake line on a lifted truck runs from the frame to the axle housing, and the lift changes the distance it has to cover. As the axle moves through its travel, the flexible section takes the stress, so the line needs enough slack to avoid pulling tight. Routing it away from the driveshaft, exhaust and sharp edges helps protect the hose over time.
Pressure in the brake system makes any weak point in the line a safety issue, so inspect the new line and fittings regularly. Check for chafing where the hose meets brackets, and look at the fittings for seepage after a few weeks of use. Replace the rear line with the front lines when they show similar wear, so the system ages evenly.
- Check clearance at full suspension compression
- Inspect the axle end fitting for weeping
- Keep the hose clear of exhaust heat
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | RBL99 |
| UPC | 803696155982 |
| Position | Rear |
| Quantity | Single |
| Hose construction | Stainless steel, braided |
| Fittings | Heavy duty off-road brass |
| Outer coating | Extruded polyurethane |
| Lift height | 4 to 8 inch |
| Length | Lifted |
| Size | 6 inches plus |
Vehicle fitment
It is a direct fit within a 4 to 8 inch lift range.
Make sure the fit suits your vehicle’s year, model and trim before buying. Check your rear axle setup against your lift height before installing.
Installation notes
Brake lines carry hydraulic pressure, so bleed the system and test the brakes after replacing this rear line.
What’s included
The package contains one rear brake line.








