Overview
The Skyjacker FBL91 is a pair of front stainless steel brake lines for the 1990–1998 Ford F-250, the 1997 F-250 HD and the 1990–1997 F-350, made for 4 to 6 inches of lift.
Skyjacker builds them with braided stainless steel, brass fittings made for off-road use and an extruded polyurethane coating. The company lists them as DOT certified and European T.U.V. approved.
Key features
- Front mounting location, sold as a pair
- Made for 4 inch to 6 inch lifts
- Braided stainless steel
- Extruded polyurethane coating
- Heavy-duty brass fittings
- DOT certified and T.U.V. approved
- Limited lifetime warranty
Matching brake lines to lift
Lift height determines how far the front brake lines have to stretch and flex, so a line made for a specific lift range is a practical match. On older Ford trucks the lines are often original rubber, and a stainless braided replacement changes how the hose responds under pressure. Lines should also be routed away from heat sources and sharp edges.
When swapping a pair, flush the old fluid, use fresh fluid and bleed each corner in the correct order. Look for kinks or rubbing at the frame rails and axle housing, and recheck the fittings after the first few drives. Keep notes of the job for future service.
- Bleed each corner in sequence
- Check frame and axle clearance
- Replace the pair together
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | FBL91 |
| UPC | 803696131511 |
| Type | Braided stainless steel brake lines |
| Mounting location | Front |
| Sold as | Pair |
| Lift height | 4 inches to 6 inches |
| Fittings | Heavy-duty off-road brass |
| Outer coating | Extruded polyurethane |
| Approvals | DOT certified, European T.U.V. approved |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 1990–1998 Ford F-250, the 1997 F-250 HD and the 1990–1997 F-350.
Ford F-250 and F-350 trucks built before 1990 are not on this list. Confirm your vehicle’s year, model and trim before ordering.









