Overview
The Skyjacker JK350BPNSR is a 3.5 inch Softride coil spring lift kit with Nitro 8000 shock absorbers for the 2007-2018 Jeep Wrangler JK. It is the Nitro shock version of the JK350BPHSR and uses the same coil springs, track bar parts and cam bolts. It fits the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
The spec sheet gives a lift height range of 3 to 4.99 inches and a maximum tire size of 35 x 12.50. The Softride springs keep the ride closer to a stock Wrangler than a firmer coil would.
Skyjacker’s description says its kits for 2007-2015 JK models were tested by an independent agency and certified compliant with FMVSS 126. The Nitro 8000 shocks in this kit are the Nitro Gas option in the Skyjacker range, alongside the Hydro and M95 Series Monotube options.
Key features
- Softride coil springs front and rear
- Nitro 8000 shock absorbers included
- Adjustable front track bar and cam bolts
- Rear track bar bracket, braces and extended links
- Hot wound 5160 spring material, shot peened
- Maximum tire size 35 x 12.50
Choosing the right setup
Shock type changes how the lift feels on the road and on the trail. Gas-charged shocks generally resist fade better during longer runs over rough ground, while other designs can feel softer at low speed. Matching the shock to how the vehicle is driven is more useful than chasing a single feature.
Larger tires and a taller stance put more load on the steering, driveline and brakes. Inspect the steering stabilizer, track bar bushings and driveline joints after installation, and recheck them after the first few trips over rough terrain. Good alignment keeps tire wear even and the steering predictable.
- Compare shock mounting hardware before installation
- Check brake hose length after the lift
- Plan wheel offset with the tire size in mind
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JK350BPNSR |
| UPC | 803696222387 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Coil spring kit |
| Rear lift method | Coil springs |
| Shocks | Nitro 8000 |
| Spring material | Hot wound 5160 |
| Maximum tire size | 35 x 12.50 |
Vehicle fitment
It is designed for 2007-2018 Jeep Wrangler JK models in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims. The Wrangler Unlimited is not among the covered models.
Confirm the body style before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the front track bar length and cam bolts during the alignment, since they control the axle position under the 3.5 inch height. Check the driveline angles and the steering stabilizer after the install.
What’s included
The kit includes front and rear Softride coil springs, front and rear cam bolts, an adjustable front track bar, a rear track bar bracket and braces, rear extended links, bumpstop relocation parts and Nitro 8000 shock absorbers.









