Overview
The Skyjacker JL40BPMLT is a 3.5 to 4 inch dual rate long travel coil spring lift for the 2018 Jeep Wrangler JL Unlimited non-Rubicon. It is the M95 shock version of the JL40BPBLT and includes the same adjustable front track bar, rear track bar extension bracket and cam bolts. It fits the Unlimited Sahara, Unlimited Sport and Unlimited Sport S trims.
The spec sheet gives a lift height range of 3 to 4.99 inches and a maximum tire size of 38 x 13.50 for street articulation, or 37 inches for full off-road articulation, with a recommended 9 inch wheel at zero offset.
The coils use left and right spring rates matched to original equipment coils, which helps keep ride and handling consistent on the highway and off road.
Key features
- Dual rate long travel coil springs front and rear
- Four M95 long travel shock absorbers included
- Adjustable and high angle front track bar
- Rear track bar extension bracket
- Front and rear extended sway bar end links and bump stop extensions
- Front and rear eccentric cam bolts
Living with a taller JL
A taller Wrangler changes the center of gravity, so braking, cornering and steering feel different than stock. Drivers often notice more body movement on uneven pavement and a slightly different turning feel. Gradual adjustment to the new stance is normal, but the steering and suspension should always feel controlled.
Accessories added to a lifted vehicle, such as heavier bumpers or winches, add weight at the front and can change how the springs settle. Recheck the height and alignment after any heavy addition. Inspecting the cam bolts, track bar and sway bar links on a regular schedule keeps the system working as designed.
- Recheck alignment after adding heavy front accessories
- Inspect cam bolts for loosening
- Watch for changes in braking feel after the install
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JL40BPMLT |
| UPC | 803696256634 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Coil spring kit |
| Front shocks | M95 long travel |
| Rear lift method | Coil springs |
| Maximum tire size | 38 x 13.50 street; 37 inch off-road full articulation |
| Recommended wheel | 9 inch, 0 offset |
Vehicle fitment
It fits the 2018 Jeep Wrangler JL Unlimited Sahara, Unlimited Sport and Unlimited Sport S. It is for 4-door non-Rubicon models.
Rubicon models use the JL40RBPMLT and are not covered here. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front track bar and cam bolts set the axle position and caster at this lift height, so align the front end once the kit is in. Check the driveline angles at both ends after the install.
What’s included
The kit includes dual rate front and rear coil springs, an adjustable and high angle front track bar, a rear track bar extension bracket, four M95 long travel shock absorbers, extended front and rear sway bar end links, front and rear bump stop extensions, front and rear eccentric cam bolts and grade 8 mounting hardware.














