Overview
The Revtek 426 is a 3-inch lift for the 2005–2012 Toyota Tacoma and PreRunner. It works on all models, including TRD and Double Cab, using coil spring spacers, lift blocks, a U-bolt kit and hardware. The components are designed to reduce front-end dive and body roll for improved handling. The maximum tire size is 285/75.
Key features
- 3-inch lift with coil spring spacers
- Lift blocks, U-bolts and an add-a-leaf for the rear
- Works on all Tacoma models, including TRD and Double Cab
- Reduces front-end dive and body roll for improved handling
- Uses the OEM shocks and struts
Keeping OEM shocks and struts
A lift that keeps the factory shocks and struts depends on those parts being in good working order. Worn units can bottom out or sag once the spacers change the ride height, so inspect for leaks, dented bodies and worn mounts before the job. Replacing a tired shock with the lift is often more economical than discovering a problem later.
The rear add-a-leaf and lift blocks raise the axle relative to the frame, which changes the shock angle and the pinion angle. Look at the rear bump stops and the brake lines, and check the driveline after the first drives. Retorque the U-bolt nuts and inspect the spacers for cracks during regular service. Tire rubbing and uneven wear are useful signs that something needs adjustment. Keep the tire size within the 285/75 limit when planning new tires.
Specifications
| Brand | Revtek |
|---|---|
| Part number | 426 |
| UPC | 811323010054 |
| Lift height | 3 inches |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Spacer |
| Rear lift method | Lift block, U-bolts and add-a-leaf |
| Maximum tire size | 285/75 |
| Shocks | Not included; OEM shocks and struts used |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005–2012 Toyota Tacoma and PreRunner, including TRD and Double Cab models.
Other Tacoma generations, and years outside 2005–2012, are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit keeps the OEM shocks and struts, so their condition should be checked before installing the spacers. The rear add-a-leaf and lift blocks change the rear spring height, so check driveline angles afterward.
What’s included
- Coil spring spacers
- Lift blocks
- U-bolt kit
- Hardware kit
Not included: shocks.









