Overview
The Skyjacker HL30ST is a 2 to 3 inch suspension lift kit built around performance front struts. The kit includes adjustable front struts and rear lift blocks, and the spec sheet lists shocks as included. The spec sheet gives a lift height range of 2.5 to 3.5 inches.
Confirm fit for your vehicle’s year, make, model and trim before ordering, since strut lifts are sized to a particular front suspension.
Key features
- 2 to 3 inch lift range.
- Performance front struts
- Adjustable front struts
- Rear lift blocks
- Shocks included, per the spec sheet
- Lift height range 2.5 to 3.5 inches
Adjustable strut setup
A performance strut lift replaces the front struts, so the front height is set as part of the installation rather than by a fixed spacer. Adjustable struts allow the ride height to be dialed in within the kit’s range, which helps match the front to the rear lift blocks. Setting the front height before the alignment is the usual order of work.
Rear lift blocks change axle position and pinion angle, so driveline angles should be measured after the install. Strut top bearings, mounts and sway bar links are often inspected at the same time. Coil springs and shock mounts should be checked for sag and leaks during regular service, and vibration at highway speed can point to the driveline.
- Front height set before alignment
- Driveline angles checked after rear blocks
- Strut top mounts and bearings inspected
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | HL30ST |
| UPC | 803696219844 |
| Lift | 2 to 3 inch suspension lift |
| Lift height range | 2.5 to 3.5 inches |
| Suspension type | Performance strut |
| Front components | Adjustable front struts |
| Rear lift method | Lift blocks |
| Shocks included | Yes |
Vehicle fitment
Fitment depends on the vehicle’s year, make and model, so confirm those before ordering.
Strut lifts are sized to a specific front suspension, so confirm your vehicle’s year, model and trim before ordering.
Installation notes
Adjustable front struts let the front height be set during installation within the range of the kit. The rear lift blocks change the rear axle position and the pinion angle, so check the driveline angles after the install, and have the front end aligned once the height is set.
What’s included
The kit includes adjustable front struts and rear lift blocks, and shocks are included. Check the contents against your installation plan before starting.








