Overview
The S&B Filters 75-5102 is an oiled cotton-filter cold air intake for the 2004–2005 Chevrolet and GMC Duramax LLY 6.6L diesel. It fits Silverado and Sierra 2500 HD and 3500 models, and it also fits 2005–2007 Dodge Ram 2500 and 3500 trucks in the trims shown below.
The one-piece airbox has an integrated box seal that keeps out unwanted engine heat. Cooler air is denser, which S&B says gives better performance. S&B lists 43.69% more airflow than the stock intake and a filter efficiency of 99.52% @ 612 CFM (ISO Coarse Dust).
The kit is designed to fit better than the stock intake, with an installation time of 45 minutes. Its premium silicone seals resist tearing and cracking.
Key features
- One-piece airbox with an integrated box seal
- Premium silicone seals that resist tearing and cracking
- Cotton oiled filter in red oil color
- 43.69% more airflow than the stock intake
- 99.52% efficiency @ 612 CFM (ISO Coarse Dust)
- Designed to fit better than the stock intake
- Installation listed at 45 minutes
Cold air intake fundamentals
Cold air intakes work by drawing air from outside the hot engine bay and routing it through a filter to the engine. Cooler air is denser, so the engine can take in more oxygen per stroke, which is the basis for the airflow gains seen on a well-sealed intake. The benefit depends on the intake staying sealed and on the filter being kept clean, because a gap or a clogged element can erase much of the gain.
Diesel trucks such as the Duramax LLY and the Dodge Ram models covered here rely on steady airflow under load, so intake leaks are worth catching early. Keep the tube connections tight, check the silicone seals for cracks, and look for dust trails around joints. If the intake is removed for other work, reinstall the seal carefully so it seats fully.
- Check silicone seals for cracks
- Keep the element clean and sealed
- Re-seat tube joints after removing the intake
Specifications
| Brand | S&B Filters |
|---|---|
| Part number | 75-5102 |
| UPC | 841372036934 |
| Engine | 6.6L Duramax LLY diesel |
| Airflow gain | 43.69% more than the stock intake |
| Filtration efficiency | 99.52% @ 612 CFM (ISO Coarse Dust) |
| Filter type | Oil (cotton), red oil color |
| Oil quantity | 87 grams on filter element; an additional 17 grams on the Power Stack (Top) for the previous version of this filter |
| Filter housing | Full enclosure |
| Intake type | Cold air |
| Fitment type | Direct fit |
| Inlet tube | Included |
| Install time | 45 minutes |
Vehicle fitment
The manufacturer fitment list covers the following vehicles for this kit:
- 2004–2005 Chevrolet Silverado 2500 HD (Base, LS, LT, WT)
- 2004–2005 Chevrolet Silverado 3500 (Base, LS, LT, WT)
- 2005–2007 Dodge Ram 2500 (Laramie, SLT, ST, Sport, TRX4)
- 2005–2007 Dodge Ram 3500 (Laramie, SLT, ST, Sport, TRX4)
- 2004–2005 GMC Sierra 2500 HD (Base, SLE, SLT, WT)
- 2004–2005 GMC Sierra 3500 (Base, SLE, SLT, WT)
Years and trucks outside this list, including 2001–2004 LB7 trucks, are not covered. Check the eighth digit of the VIN: a 2 means an LLY, while a 1 means an LB7 that needs the 75-5101 kit.
Installation notes
Add the 87 grams of oil to the filter element; if you have the previous version of the filter, add 17 grams to the Power Stack (Top). S&B states about 45 minutes for installation. Disconnect the battery before starting work under the hood.
What’s included
The inlet tube is part of the kit. Confirm whether oil comes with the kit before installing, since the oil quantities are given for the element and the Power Stack.
























