Overview
The Rubicon Express Truss Kit Rear Tri-Link, part number RE4405, converts the rear of a 2003-2006 Jeep Wrangler (TJ) to a true 3-link setup. It is meant for owners who already have a Rubicon Express long arm system and want to triangulate the rear end. The kit eliminates the rear track bar, which Rubicon Express says can cause lateral axle movement.
The kit features an HD SF1 pivot ball assembly attached with 5/8 grade 8 hardware, which Rubicon Express says provides superior strength and up to 32 degrees of misalignment. Exhaust modifications are required for installation.
Key features
- Tri-link conversion for the rear
- HD SF1 pivot ball assembly
- 5/8 inch grade 8 hardware
- Up to 32 degrees of misalignment
- Eliminates the rear track bar
Tri-link geometry and alignment
A tri-link rear uses three links to locate the axle, which controls axle movement without a track bar. The geometry depends heavily on link length and mounting position, so the setup should be checked for correct angles after installation. Worn bushings or bent links can change the alignment quickly, so inspect them with the rest of the rear suspension.
Pivot ball assemblies carry much of the load at the axle end, so their condition matters. Inspect the pivot for play, look for cracked boots or seals, and check hardware torque after the first few drives. Owners who regularly off road often find the rear alignment needs a recheck sooner than on pavement-only use.
- Check rear alignment after installation
- Inspect pivot for play at each service
- Recheck hardware torque after initial drives
- Look for exhaust contact after the change
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE4405 |
| UPC | 614901441291 |
| Hardware | 5/8 inch grade 8 |
| Pivot | HD SF1 pivot ball assembly, up to 32 degrees of misalignment |
| Shocks | Not included |
| Fitment | Direct fit |
Vehicle fitment
It is written for the 2003-2006 Jeep Wrangler (TJ), covering the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X versions. The model years match the TJ range.
The kit covers the 2003-2006 TJ range, so confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Exhaust modifications are required before the tri-link can be fitted. The kit includes hardware and instructions, and the rear alignment should be checked after the rear track bar is removed.







