Overview
The Rubicon Express RE6200M is a 5.5-inch Extreme-Duty short arm lift kit for the Jeep Cherokee XJ, with Mono Tube shocks included. It fits the 1984-2001 Jeep Cherokee (XJ). It is the shock-equipped version of the RE6200 and uses the same heavy-duty track bar, front control arm relocation brackets and Extreme-Duty rear leaf springs.
The system is a complete replacement suspension for XJ Cherokees running factory short arm geometry, built for heavy trail running. The heavy-duty track bar and relocation brackets are designed to allow flexibility and a comfortable on-road ride. The kit includes replacement front tuned coil springs, new control arms with Super-Flex spherical ball joints and Gen II sway bar disconnects. The lift range is 5 to 6.99 inches.
Key features
- 5.5-inch lift height, within the 5 to 6.99-inch range
- Mono Tube shocks included
- Heavy-duty track bar
- Front control arm relocation brackets
- Replacement front tuned coil springs
- Extreme-Duty rear leaf springs
- Control arms with serviceable Super-Flex spherical ball joints
- Gen II sway bar disconnects and PT-Meg Super-Ride bushings
Long-term care after install
Short arm lifts change how the front and rear suspension load the frame, so the parts that wear first tend to be the track bar bushings, sway bar links and ball joints. Inspect the Super-Flex joints and control arm bushings at regular intervals, looking for play, torn boots or cracked rubber. Re-check the track bar bolts after the first few trail runs, since the heavy-duty bar moves under load.
Leaf springs settle over time, so measure ride height after the first few weeks of driving and recheck alignment if the front sits lower than expected. Keep the joints greased where fittings allow, and keep an eye on the sway bar disconnects, which should move freely without binding.
- Check ball joint boots for tears
- Inspect bushings and bolts after off-road trips
- Recheck alignment after any suspension change
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE6200M |
| UPC | 614901452693 |
| System type | Extreme-Duty Super-Flex short arm |
| Lift height | 5.5 inches (chart range 5 to 6.99 inches) |
| Rear lift method | Leaf springs |
| Track bar | Heavy duty, adjustable |
| Joints | Serviceable Super-Flex spherical ball joints |
| Shocks | Mono Tube, included |
Vehicle fitment
It fits the 1984-2001 Jeep Cherokee (XJ) in the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport versions. Wrangler and Grand Cherokee generations are not covered. Verify the year, model and trim against your vehicle before buying.
The Wrangler and Grand Cherokee generations are not part of this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The leaf springs, relocation brackets and new control arms change the suspension at every corner, so the alignment and caster should be checked after the install.
What’s included
The kit includes replacement front tuned coil springs, Extreme-Duty rear leaf springs, a heavy-duty track bar, front control arm relocation brackets, control arms with Super-Flex spherical ball joints, Gen II sway bar disconnects and Mono Tube shocks.


